ED 100 and ED 250 automatic swing door operators

S-P-00597 Image 1

Product information

The automatic swing door operators manufactured by DORMA are electromechanical swing door operators designed for single- or double-leaf swing doors. Depending on the width and weight of the door leaf, the ED 100 or the ED 250 is required. Both operators can be mounted with standard arm as push-version and with sliding channel as pullversion. Apart from the extended cover, an integrated door coordinator is also available for double-leaf operators, which is also easily fitted. By using the DORMA Upgrade Card, the functional scope can be adapted to a variety of door situations.

  • Flexible configuration of the functions actually required
  • Inexpensive transport and easy assembly thanks to lower weights
  • Low-noise application thanks to multi-stage gear
  • Elegant design: DORMA Contur Design with an operator height of only 70 mm

The two ED 100 and ED 250 variants are particularly distinguished by their drive units. For this reason, the ED 250 was taken into consideration in the analysis (maximum characteristics of a swing door operator). Only formation of the average for energy consumption during the usage phase follows the arithmetic average. Using this conservative implementation method, the LCA results are indicated as averages for both swing door operators (ED100 / 250).

This EPD has been registered under the scope of mutual recognition between Institut Bauen und Umwelt e.V. (IBU) and The International EPD® System. The EPD thus has the right to bear the logotype of both programmes, and is also published here: https://ibu-epd.com/. IBU registration number: EPD-DOR-2012211-EN and EPD-DOR-2012211-SE.

Detailed information

Registration number:
Registration date:
December 11, 2014
Version date:
April 29, 2016
Valid until:
April 28, 2021
Geographical scopes:

Company information

Company Name:
DORMA Deutschland GmbH

Included products in this EPD

ED 100
ED 250

Use this QR code to link directly to this page
QR Code