EPD-IES-0009530:002 (S-P-09530)
Cement-based Plasters
- SV 1 is a high strength spatter dash coat. It is mainly used as a first coat (thrown or splashed) in all rendering techniques and methods, to improve the adhesion of the plaster applied afterwards. It is applied on bricks, concrete blocks, porous concrete elements (YTONG - ALFABLOCK etc.), concrete surfaces (columns - ceilings - beams etc.), stone, thermal insulation slabs and other materials.
- SV 2 is a base-coat ready plaster used for improving adhesion on difficult surfaces. It is used as a base coating on exterior and interior surfaces when applying the three-coat technique, creating a suitable flat surface over which the final white render will be applied. It is suitable for the construction of mud guides. It may be applied on bricks, concrete blocks, porous concrete elements, concrete surfaces (columns - ceilings - beams etc.), stone, thermal insulation slabs and other materials, after the application of the hammered plaster (SV1).
- SV 3 is a marble-based white finish-coat ready plaster used to enhance adhesion. It is used in the application of the three-layer technique, as a final layer of plaster (marble) on external and internal surfaces which have been previously coated with the base layer plaster (SV2). Due to the nature and fine grain size of the Dionysus marble content (<1,2mm) it gives white and smooth final surface ready for sanding and painting. In special cases the product can be enhanced by adding MARMOLINE MP 20 resin.
- SV 60 is a single layer ready plaster with additives used to improve adhesion. It minimizes material preparation time and increases the speed of application. It provides a smooth final surface ready for sanding and painting, due to the nature and fine grain size of the calcareous aggregate content (< 2 mm). The application is done either manually, with a trowel or with plastering presses. In special cases the product can be reinforced by adding MARMOLINE MP 20 resin.
- DECOR SV 010 is a water repellent, cement-based finish coat render, applied as final coating, while increasing resistance to moisture snow and frost. It can also be applied as a finish coat on external thermal insulation systems. In combination with the fiber-reinforced adhesive FK 202 it is used as a final coating for external thermal insulation systems of buildings. Ideal for cases where additional protection from moisture is required (coastal houses, islands, mountainous - semi-mountainous areas, etc.).
- MONO SV 100 is a single layer white ready plaster with special additives to improve adhesion. It replaces mud and marble by combining both in one layer. It is applied like the basic plaster and sanded like marble. The application thickness should not exceed 2 cm. Due its nature and the fine grain size of the Dionysus marble content (<1,2mm) gives a white and smooth final surface ready for sanding and painting.
- BP 115 is a single layer white ready plaster with aggregates of selected granulometry and special additives to strengthen adhesion. Mixing with water only is required. This minimizes the preparation time of the material and increases the speed of application of the material. It replaces mud and marble by combining both in one layer. It is applied like the basic plaster and sanded like marble.
- BP 110 is a ready cement-based plaster used as a one-layer plaster on exterior and interior surfaces. It replaces mud and marble by combining both in one layer. Similarly, to BP115 it provides a white and smooth final surface ready for sanding and painting.
- FP 140 is a water repellent, cement-based finish coat render, applied as a final coating. Ideal where protection from moisture is required (seafront houses, islands, mountainous – partly mountainous areas, etc.). It is used when applying a three-layer technique, as a final layer of plaster (marble) on external surfaces that have been previously coated with the SV2 base layer plaster. In combination with FK 202 fiber-reinforced adhesive, it is used as a final coating for external thermal insulation systems for buildings.
- GN 30 is a gunite plaster used for masonry reinforcement. It is used where aiming for significant reinforcement of the masonry, e.g., old brick walls, stone walls, etc. and in cases it may be used in combination with metal mesh. It is ideal for renovation, repair, reconstruction of old and new buildings. Also, for repairing problems after an earthquake, for repairing listed buildings, etc.
- SV 103 is a one coat ready, white plaster of single layer repair plaster used to ensure strong adhesion to the substrate and high mechanical strength. It is used for the repair and restoration of damaged plaster parts, in old and new constructions, on external and internal surfaces of buildings. Additionally, its usage includes repair work to restore plaster sections. Ideal for repairing corners, and as a restoration plaster in cases where traditional marble plaster has been removed after frost damage.
- LM 400 is a ready white thick bed plaster used to ensure adhesion of marble and granite tiles and boards to difficult surfaces. LM 400 ensures maximum protection of white or colored marbles against stains from the substrate. The addition of MARMOLINE MP 20 resin provides additional strength and elasticity of bonding of the marble tile to the substrate.
- CM 40 is a grey ready plaster used to improve weld. It significantly increases the speed of preparation of the material and construction of the masonry. It is used for building bricks, concrete blocks, stone, and generally any kind of building material in internal partitions and external walls. Used for laying paving slabs, paving blocks and slabs.
- SV 101 is a fast-setting, ready, white plaster of single layer repair plaster used to ensure strong adhesion to the substrate and high mechanical strength. It is mainly used for the repair and restoration of damaged parts of plaster, in old and new constructions, on external and internal surfaces of buildings.
- TL 2 is an insulating lightweight base layer plaster used as a base layer of plaster (on external and internal surfaces when applying the three-layer technique, creating a suitable flat surface on which the final white plaster (marble finish) will be applied.
- ST 10 PRO is a fine-grained spackling material for the perfect smoothing of surfaces made of plaster, concrete, plasterboard and aerated concrete, indoors and outdoors to be painted. It is easily spread on the surface without the need for priming and preparation with oil sticks.
- STUCCO BIANCO is a ready industrial white super fine-grained new generation plaster with special acrylic additives to improve adhesion. It is used for the perfect smoothing of surfaces made of plaster, concrete, plasterboard, and aerated concrete, in interior and exterior areas to be painted. It is easily spread on the surface without the need for priming and preparation with oil sticks.
| Registration number | EPD-IES-0009530:002 (S-P-09530) |
|---|---|
| PCR | 2019:14 Construction products (EN 15804+A2) 1.3.4 |
| Status | Valid |
| Publication date | 2024-02-20 |
| Valid until | 2029-02-07 |
| EN 15804 compliant | Yes |
| Geographical scope | Europe |