Steel Pipes and Profiles

The products investigated in this EPD are the steel pipes and profiles manufactured by Özdemir Boru ve Profil San. Tic. A.Ş at the company’s two plants that are both located in Zonguldak province of Türkiye. The one and only raw material used for the production is primary flat steel.

The amount of steel used to produce 1 ton of final product changes during the production of different thicknesses due to the waste rate. Both pipes and profiles manufacture between the meat thickness range of 0.60 mm to 12.50 mm. When the smallest and largest diameters are considered for both products, the environmental performance for all the main indicators do not change more than 10 %. Additionally, the production methods and energy requirements are all the same for the two plants.

ÖZDEMİR PIPE was established at the beginning of 1980's and has an important experience in steel pipe and profile production for more than 35 years.

It can produce square and rectangular profiles with outer pipe diameters from 6 mm to 355.6 mm and dimensions from 10x10 to 300x300/200x400. It manufactures hot and cold rolled materials in a wide range of pipe / profile products with a meat thickness of 0.60 mm to a thickness of 12.50 mm. The products have a wide range of sizes and shapes, including round pipe, square and rectangular profile, specially shaped (oval, ellipse, D) profiles, open (U and Omega) profiles.