Family of galvanized sheet metal: grilles, air diffusers, regulators, air flow boxes, chilled beams, dampers and air intakes made.

This product facilitates the diffusion and control of air flow in ventilation and air conditioning systems, both in supply and extraction. 

• Series 20-90: Different types of grilles and diffusers with variations in design and performance. 

• Long-throw diffusers: For large spaces, they project air over long distances. 

• Floor diffusers: Installed on the floor for discreet distribution. 

• Supply grilles: Grilles for supplying air. 

• Circular/Square diffusers: Round or square diffusers for uniform distribution. 

• Linear diffusers: Long diffusers for linear distribution. 

• Displacement: Systems that introduce air at low speed. 

• Air volume boxes: Control airflow. 

• Air-water: Air conditioning systems that use water. 

• Shutters/Dampers: Control airflow in ducts. 

• Acoustic: Products to reduce noise. 

• Air volume boxes and regulators: Devices to control the amount of air supplied. 

• Chilled beams/Induction: Air conditioning systems that use chilled water. 

• Control Dampers/Air Intakes: Dampers to regulate airflow and outdoor air intakes

It does not include products that integrate additional motors or acoustic and thermal insulation.

Variations between references within the same family are limited to differences in weight, shape, and components. To investigate possible variations in the results, a product with a higher and lower impact on the sheet metal was also modeled and analyzed. The RCQK, which contained ABS, had the highest impact, and the DFRO Series 40, which was made entirely of sheet metal, had the lowest impact. For product weight results, please refer to the product catalog or contact Koolair.

Since the functional unit of the study is 1 kg of product, presenting the results per kg effectively covers all individual references within each family. This allows for a comprehensive assessment of the environmental impact of product families, considering variations in weight and shape.

The variability between products and families has been calculated and is presented in the additional information chapter, some of which exceed 10%. The technical characteristics are referenced on the Koolair website. https://www.koolair.com/productos/