TIMBABUILD® EWS EPOXY WOOD REPAIR

Timbabuild® Epoxy Wood Stabiliser is a solvent free, low viscosity two component epoxy resin-based wood repair primer. The resin and the hardener are in a 2:1 volume ratio. The mixing ratio between the resin component and the hardener component is set automatically when the product is squeezed into the dispensing chamber. Curing begins immediately after the components are mixed. The product is dispensed from plastic bottles by removing the right-hand cap, squeezing until the dispensing chamber (right) is full and then poured into a mixing vessel (e.g. cup). It was developed principally to strengthen weakened wood fibres by penetrating deep into the wood. EWS is used as a primer in conjunction with the Epoxy Rapid Cure (ERC10) or Epoxy High Build (EHB60) systems. It provides a physical and chemical bond which is stronger than the original wood.