ROBIN iFORTE® FS

iFORTE® FS negates the traditional weight penalty associated with IP-rated fixtures being only 1.5 kg heavier than the indoor FORTE®. With its form factor, size and appearance, and all the features and identical performance of the indoor original, iFORTE® FS enables seamless integration with each other.The ingress protection system has been specifically designed to allow standard maintenance and preparation procedures, such as TRANSFERABLE ENGINE exchange and gobo replacement without any additional tools, as gobo change or maintenance work can be done on-site.

The onboard RAINS™ (Robe Automatic Ingress Neutralization System) manages humidity, temperature and pressure control using an active monitoring system to automatically remove any moisture detected within the fixture and provides constant monitoring to ensure peak performance. iFORTE® FS automatically runs a self-test every time it senses a cover was removed and replaced. This self-test, taking no more than 3 minutes, provides an error message if covers were not replaced correctly or locking screws were incorrectly tightened. Their lightweight magnesium alloy covers, with aluminium alloy structure, provide a dust-free environment for the optics, eliminating the need for frequent cleaning, routine maintenance, and UV damage to plastic parts.

To maintain consistently high lumen output, even with the rigours of outdoor performance, water, dirt, dust, haze, and smoke are repelled from the front lens with the parCoat™ hydrophobic, oleophobic resistant coating. Furthermore, it allows easy removal without scratching or damage.

By including NFC (Near-Field Communication) technology, a user can access setup, diagnostic and performance features, even when the fixture is not powered, directly from his mobile device using the Robe Com app.

iFORTE® FS is available with a choice of patented IP65-rated iSE-TE™ 1000W White LED TRANSFERABLE ENGINES; HP (High Performance) 6.700 K, 50.000 lm (Integrating sphere) CRI70; HCF (High Colour Fidelity) 6.000 K, 35.000 lm (Integrating sphere) CRI 96. The identical 11:1 zoom optical system, with a 5.5° to 55° zoom range, provides wide range of flexibility.

Removing the need for distracting pre-use pan and tilt calibration movement, the MAPS™ (Motionless Absolute Positioning System) allows the fixture to fully calibrate while remaining static. Very useful when fixtures are located within confined spaces.

The CMY colour mixing system provides beautifully smooth mixing and transitions. Combined with two colour wheels, CRI 80 and 90 filters (HP Engine), and a variable CTO from 3.000 – 6.700 K give iFORTE® FS total colour finesse.

With the Plano4™ four individual plane framing shutters, two fully indexable rotating gobo wheels, an animation wheel, two independent 6-facet prisms and two MagFrost 1° and 5° frosts, are available all the needed creative tools.

Keeping up with technological advances, for television users, Cpulse™ is included for flicker-free management of HD and UHD camera systems.

The iFORTE® FS FollowSpot is equipped with a full HD digital camera mounted on the head, again with parCoat™ lens protection. The IP65-rated camera features 32x optical and 32x digital zooms and is suitable for light levels down to 0.05 lux. It connects to the RoboSpot™ BaseStation for remote-controlled follow spot operation.

• Light source: TE™ 1.000W iSE White LED TRANSFERABLE ENGINE

• Light output: up to 50.000 lm, 113.000 lx @5m, Cpulse™ special flicker free management for HD and UHD cameras, ready for 8K and 16K

• Zoom range: 5° - 55°

• Effects: 2 rotating gobo wheels, 2 color wheels, animation wheel, frost, iris, 6-facet circular and linear prisms, framing shutters