TOORS INDY FVE

Sectional industrial doors TOORS INDY FVE are intended for installation in areas in the reach of persons, and for which the main intended use are giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises.

The door construction consists of sections produced from full-transparent FVE sections assembled from aluminium profiles, which are connected to each other by middle and side hinges ensuring the bending of the door leaf when passing through the rail curve. The roller holder with rollers are fixed on the side hinges to ensure the guidance of the door leaf in the rails during opening and closing. The construction of the rail system is made of galvanized steel profiles, installed as a whole on the vertical wall on both inner sides of the building opening and ensure correct movement of the door leaf into the space above the entrance area. When the door leaf is completely closed, it is sealed by a sealing system located on the vertical rail system and on the leaf itself. It is equipped with an electric operator, this is then located directly on the steel shaft above the opening, mounted in bearing consoles, together with torsion balancing springs and two drums for winding the carrying cable on which the door leaf is hooked via the bottom bracket and ensures its opening and closing.

The door is equipped with additional safety components (mechanical, electronic) so that the complete system fully complies with European standard EN 13241 - Doors - Product standard, Products without fire and smoke resistance.

The door is also equipped with a passage door, which reduces the frequency of opening the entire door and simplifies the passage of individual persons.