Primers and Coatings - Floorgum Paint, Aquafloor Eco, Aquabond, Vapostop, Color Primer, Grip Primer, D20, SBS-Bond

DIASEN primer and coating products are all made in Italy, and are formulated with natural raw materials, are all water-based and designed to have low environmental impact while benefiting living comfort.

The Diasen primer line offers innovative solutions, designed to solve specific problems in buildings and to improve the healthiness of environments and the quality of life of the people living them. Diasen primers allow for the correct anchoring of the materials on any type of surface, thus improving the stability, durability and well-being of the systems. These products are all water-based, and the formulation being solvent-free brings advantages such as reduced health risks and safety requirements. The Diasen coating line is made out of multifunctional products designed and implemented with the purpose of coating, protecting and preserving the underlaying system. These solvent-free coatings are formulated with different water-based resins, and therefore differ in their specific nature: Polyurethane, Acrylic or Epoxy.

PRODUCTS

Floorgum Paint - Water-based acrylic liquid coating designed to be a multi-purpose coating, for walkable protective coatings on liquid waterproofing systems, as an alternative to the traditional ceramic tile. The product is also suitable for the construction of multipurpose playgrounds, cycle paths, delimitation of pedestrian areas and anti-slip coatings. Resistant to UV rays, wear stress and sudden changes in temperature.

Aquafloor Eco - Two-components, transparent water-based polyurethane coating, suitable for the protection of different types of surfaces (acrylic or epoxy resin), Aquafloor Eco protects and increases the abrasion of a surface to make it walkable and easy to clean. It is water and detergent resistant, and can be used in bathrooms and shower rooms to protect finishes from the effects of cleaning chemicals.

Aquabond - Water-based adhesive primer formulated with added aggregate granules that, after drying, provides a semi-smooth (gritty) surface. Its gripping ability stands out as it performs excellently even on very smooth and waterproof mineral substrates.

Vapostop - One-component primer formulated with MS polymers, specific for cementitious substrates, designed to increase the degree of adhesion of waterproofings and and acrylic coatings. The primer creates a barrier to the formation of blistering and prevents detachment caused by humidity; it can be applied on damp supports and, as it is water-resistant, it protects concrete from degradation and carbonation.

Color Primer - White one-component water-based undercoat for decorative finishes, consisting of special resins and fine quartz, designed for outdoor and indoor application on mineral surfaces, new or old plasters, pre-existing coatings. Also suitable as a primer on smooth and non-absorbent surfaces.

Grip Primer - Water-based primer designed for smooth and non-absorbent surfaces, mainly used over the application of plasters. It has a high vapour permeability, thus maintains the breathability of the wall and all other breathable product systems being used. 

D20 - The product is a water-based acrylic primer mainly used over new plasters to ensure excellent long-term adhesion and a long-lasting finish for paints and surface finishes. It effectively stabilises and prepares the surface prior to painting. 

SBS-Bond - Ready to use, bituminous, water-based primer that creates a good bonding bridge on new and old bituminous membranes, either smooth or granulated. Excellent primer for liquid waterproofing and coatings.