ALPOLIC™ NC / A1 Non-combustible Aluminium Composite Panel

ALPOLIC™ NC / ALPOLIC™ A1 is composed of non-combustible core sandwiched between two skins of 0.5mm thick aluminum alloy (3105-H14) and is manufactured by Mitsubishi Chemical Infratec Co., Ltd in Japan. The non-combustible core material has a calorific value of less than 1 MJ/kg when tested in accordance with EN13501-1. ALPOLIC™ NC / ALPOLIC™ A1 is now A1 Classified in accordance with EN13501-1 and is the first ACP in the world to have achieved this milestone.

Like all ALPOLIC™ products, ALPOLIC™ NC / ALPOLIC™ A1 is easy to fabricate, has excellent weatherability, good impact resistance and extremely flat without any oil canning. The surface is finished with a high-performance Lumiflon™-based fluoropolymer coating as standard and is protected with a co-extruded (white/black) removable, self-adhesive protection film. ALPOLIC™ NC / ALPOLIC™ A1 is available in finishes of: Solid Colors, Metallic Colors, Sparkling Colors, Prismatic Colors and Patterns. In these finishes, Lumiflon-based fluoropolymer paints are applied in manufacturer’s continuous coil coating lines.

The back side of ALPOLIC™ NC / ALPOLIC™ A1, which will face the structural wall or steel when it is installed as a cladding panel, has a polyester-based wash coating or a service coating to protect it from possible corrosion problems. ALPOLIC™ NC / ALPOLIC™ A1 is highly recommended for exterior or interior claddings, soffit linings and roof covering in new buildings and retrofit applications wherever a non-combustible material is required.