EPD-IES-0033186:001

Permoglaze Xtreme White

Permoglaze Xtreme White is a high-quality water-based paint formulated with a durable polymeric medium and selected pigments. It provides high opacity, whiteness, viscosity and spreading performance while allowing controlled dilution during application. It produces a matt white finish and is suitable for walls and ceilings on interior and exterior surfaces. The spreading rate is approximately 12 m²/litre/coat. The product contains less than 1.0 g/l VOC and less than 7.1 g/l SVOC.

General information

EPD OwnerSofap ltd
Registration numberEPD-IES-0033186:001
EPD typeEPD of a single product from a manufacturer/service provider
StatusValid
Version date2026-09-01
Validity date2031-08-31
Standards conformanceISO 14025:2006, EN 15804:2012+A2:2019/AC:2021
Geographical scopeGlobal, Mauritius
An EPD may be updated or depublished if conditions change. This is the latest version of the EPD.

Programme information

ProgrammeInternational EPD System
AddressEPD International AB Box 210 60 SE-100 31 Stockholm Sweden
Websitewww.environdec.com
E-mailsupport@environdec.com

Product category rules

CEN standard EN 15804 serves as the Core Product Category Rules (PCR)
Product Category Rules (PCR)2019:14 Construction products (EN 15804+A2) (version 2.0.1) 2.0.1
PCR review was conducted byThe Technical Committee of the International EPD System. See www.environdec.com for a list of members. Review chair: Rob Rouwette (chair), Noa Meron (co-chair). The review panel may be contacted via the Secretariat www.environdec.com/support.

Verification

Independent third-party verification of the declaration and data, according to ISO 14025:2006, via
Third-party verifierVijay Thakur (VIJAY THAKUR)
Approved byThe International EPD® System
Procedure for follow-up of data during EPD validity involves third party verifier
*EPD Process Certification involves an accredited certification body certifying and periodically auditing the EPD process and conducting external and independent verification of EPDs that are regularly published. More information can be found in the General Programme Instructions on www.environdec.com.

Ownership and limitation on use of EPD

Limitations

EPDs within the same product category but published in different EPD programmes, may not be comparable. For two EPDs to be comparable, they shall be based on the same PCR (including the same first-digit version number) or be based on fully aligned PCRs or versions of PCRs; cover products with identical functions, technical performances and use (e.g. identical declared/functional units); have identical scope in terms of included life-cycle stages (unless the excluded life-cycle stage is demonstrated to be insignificant); apply identical impact assessment methods (including the same version of characterisation factors); and be valid at the time of comparison.

Ownership

The EPD Owner has the sole ownership, liability, and responsibility for the EPD.

Information about EPD Owner

EPD OwnerSofap ltd
Contact person nameRajendra Mahajan
Contact person e-mailrajendra.mahajan@sofap.mu
Organisation address DBM Industrial Zone, Coromande / MAURITIUS 71625 Coromandel Mauritius
LCA PractitionerJyoti Jyotsana, jyoti.jyotsana@metsims.com Furkan Can Akalin, furkancan.akalin@metsims.com

Description of the organisation of the EPD Owner

Founded in 1988, Sofap has grown alongside generations of Mauritians, building its reputation on a simple promise: quality products, continuous innovation, and a genuine passion for colour and coatings. Over the years, the company has become a trusted presence across the island, with its products available in more than 600 hardware stores and through 13 Sofap Inspirations Stores strategically located across Mauritius and Rodrigues. At the heart of Sofap’s offering is a diverse portfolio designed to meet a wide range of needs and industries. From the trusted Permoglaze range, exclusively distributed in Mauritius, to TRIBE textured coatings that bring character and creativity to interior and exterior spaces, and PERMOFIX solutions developed for reliable tile installation, each product reflects a commitment to performance, durability and innovation. Beyond its own product lines, Sofap also brings internationally recognised expertise to the Mauritian market. The company proudly distributes renowned brands such as Spies Hecker and Nason, part of the Axalta Coating Systems group and specialised in automotive refinishing, alongside ICA from Italy and Nova from South Africa for the wood finishing industry. Completing this ecosystem is a wide range of painting accessories, including Atlas brushes and rollers from Brazil, ensuring professionals and individuals alike have access to the tools they need to bring their projects to life. As for product and management system certifications, Sofap is certified ISO 9001:2015 for Quality Management and ISO 14001:2015 for Environmental Management.

Organisation images

Organisation logo

Product information

Product namePermoglaze Xtreme White
Product identificationPermoglaze Xtreme White, a factory-produced, high-viscosity, water-based white emulsion paint for interior and exterior walls and ceilings. The product is stated to comply with the Mauritius Standards Bureau Ecolabel Standard.
Product descriptionPermoglaze Xtreme White is a high-quality water-based paint formulated with a durable polymeric medium and selected pigments. It provides high opacity, whiteness, viscosity and spreading performance while allowing controlled dilution during application. It produces a matt white finish and is suitable for walls and ceilings on interior and exterior surfaces. The spreading rate is approximately 12 m²/litre/coat. The product contains less than 1.0 g/l VOC and less than 7.1 g/l SVOC.
Technical purpose of productThe product is intended to provide a highly opaque, bright-white decorative matt finish for interior and exterior walls and ceilings, including applications where high coverage and whiteness are required.
Manufacturing or service provision descriptionPermoglaze Xtreme White is manufactured as a water-based emulsion paint using a high-durability polymeric medium and specially selected pigments. The constituent materials are proportioned and blended to achieve the required viscosity, consistency, opacity, whiteness and application performance. Following quality control, the finished paint is filled into containers, labelled and packaged for distribution.
Material propertiesVolumetric mass density: 1451 kg/m3 Coverage area: 10 m2/l Area density: 0.1451 kg/m2
Volumetric mass density:
1451 kg/m3
Coverage area:
10 m2/l
Area density:
0.1451 kg/m2
Manufacturing siteSofap Ltd. Sofap Facility DBM Industrial Zone, Coromande / MAURITIUS 71625 Coromande Mauritius
UN CPC code35110. Paints and varnishes and related products
Geographical scopeGlobal, Mauritius

Product images

Technical characteristics and performance

Technical performance

Product nameSectionParameterInformationType categoryType categoryType categoryType categoryType categoryType categoryType categoryType category
Permoglaze Xtreme WhiteApplicationMethodBrush, Roller , Airless Spray
Permoglaze Xtreme WhiteApplicationThinningWater
Permoglaze Xtreme WhiteApplicationDilution – Brush & Roller – 1st CoatDilution volume ratio of 5 parts of paint to 1½ part of water (or dilute with 30% water).
Permoglaze Xtreme WhiteApplicationDilution – Brush & Roller – 2nd & 3rd CoatDilution volume ratio of 5 parts of paint to 1 part of water. (or dilute with 20% water).
Permoglaze Xtreme WhiteApplicationDilution – Airless Spray – 1st CoatDilution volume ratio of 5 parts of paint to 1 part of water (or dilute with 20% water).
Permoglaze Xtreme WhiteApplicationDilution – Airless Spray – 2nd & 3rd CoatDilution volume ratio of 5 parts of paint to ½ part of water (or dilute with 10% water).
Permoglaze Xtreme WhiteApplicationCleaningWater
Permoglaze Xtreme WhiteProduct InformationFinishMatt
Permoglaze Xtreme WhiteProduct InformationShadesWhite
Permoglaze Xtreme WhiteProduct InformationSpreading Rate±12m²/liter/coat depending on conditions
Permoglaze Xtreme WhiteProduct InformationVOCLimit for this product: 10g/l. This product contains less than 1.0g/L VOC.
Permoglaze Xtreme WhiteProduct InformationSVOCLimit for this product: 30 g/l. This product contains less than 7.1g/L VOC.
Permoglaze Xtreme WhiteProduct InformationDrying Time – Touch Dry30 minutes at 25°C
Permoglaze Xtreme WhiteProduct InformationDrying Time – Hard Dry1–3 hours at 25°C
Permoglaze Xtreme WhitePrecautionsAir TemperatureThe air temperature must not be below 10°C and not higher than 35°C.
Permoglaze Xtreme WhitePrecautionsHumidityHumidity must not be below 10% and not higher than 85%.
Permoglaze Xtreme WhitePackagingAvailable Sizes1, 5, 10 and 20 litres
Permoglaze Xtreme WhiteStorageStorage ConditionsStore in a cool, dry and well-ventilated place.
Permoglaze Xtreme WhiteSafety, Health & Environment InformationHandlingHandle with care.
Permoglaze Xtreme WhiteSafety, Health & Environment InformationVentilationEnsure good ventilation during application.
Permoglaze Xtreme WhiteSafety, Health & Environment InformationRespiratory ProtectionIn case of insufficient ventilation during painting, wear suitable respiratory equipment.
Permoglaze Xtreme WhiteSafety, Health & Environment InformationSkin and Eye ContactAvoid contact with skin and eyes.
Permoglaze Xtreme WhiteSafety, Health & Environment InformationSkin ContactIf contact with skin occurs, wash well with soap and water.
Permoglaze Xtreme WhiteSafety, Health & Environment InformationEye ContactRinse immediately with plenty of clean water and seek medical attention.
Permoglaze Xtreme WhiteSafety, Health & Environment InformationChild SafetyKeep out of reach of children.
Permoglaze Xtreme WhiteSafety, Health & Environment InformationEmpty ContainersDo not use empty paint containers for storing foodstuffs.
Permoglaze Xtreme WhiteSafety, Health & Environment InformationDisposalDo not throw paint containers or contents into waterways or the environment.
Permoglaze Xtreme WhiteSafety, Health & Environment InformationRestricted MetalsContains no added lead, mercury, nickel or cadmium.

Content declaration

Hazardous and toxic substancesThe product does not contain any substances from the SVHC candidate list in concentrations exceeding 0.1% of its weight.
Product content
Content nameMass, kgPost-consumer recycled material, mass-% of productBiogenic material, mass-% of productBiogenic material1, kg C/declared unit
Fillers0.405000
Solvents0.373000
Binders0.125000
Pigments0.074000
Others0.023000
Total1000
Note 11 kg biogenic carbon is equivalent to 44/12 kg of CO2
Packaging materials
Material nameMass, kgMass-% (versus the product)Biogenic material1, kg C/declared unit
Plastic bucket0.0525.20
Total0.0525.20
Note 11 kg biogenic carbon is equivalent to 44/12 kg of CO2

LCA information

EPD based on declared or functional unitDeclared unit
Declared unit and reference flowPermoglaze Xtreme Whitemed Mass: 1 kg
Conversion factor to mass1
Are infrastructure or capital goods included in any upstream, core or downstream processes?
Datasources used for this EPDecoinvent database (general) ecoinvent 3.11 database
LCA SoftwareSimaPro 10.2
Version of the EN 15804 reference packageEF Reference Package 3.1
Characterisation methodsCharacterisation factors according to EN 15804:2012+A2:2019 and the Environmental Footprint (EF 3.1) method, based on ISO 14040 and ISO 14044.
Technology description including background systemPermoglaze Xtreme White is a high-viscosity water-based emulsion paint intended to provide a highly opaque and bright white matt finish on interior and exterior walls and ceilings. The product formulation consists primarily of water, a high-durability polymeric binder, specially selected pigments and formulation additives. The product is manufactured through the controlled formulation and blending of these constituents to achieve the required whiteness, viscosity, opacity, consistency and application performance, and is subsequently filled into containers and packaged for distribution. The background system includes the upstream production and transport of raw materials and packaging materials, the energy and utilities used at the manufacturing site, and the treatment of production waste within the modelled system boundary. The paint can be applied by brush, roller or airless spray, with water used for thinning and equipment cleaning. Depending on the application method, dilution of up to 30% may be used. The product has a spreading rate of approximately 12 m²/litre per coat. At 25°C, it is touch dry in approximately 30 minutes and hard dry within 1–3 hours.
Scrap (recycled material) inputs contribution levelLess than 10% of the GWP-GHG results in modules A1-A3 come from scrap inputs

Data quality assessment

Description of data quality assessment and reference yearsDeclaration (EPD) is based on both primary and secondary data. Primary data was collected directly from the manufacturer’s production processes and site-specific operations for the reference year 2025. The quality and representativeness of all data used for the EPD has been evaluated in terms of time, geography, and technology according to the principles outlined in EN 15804:2012+A2:2019, Annex E, and the data quality requirements specified in EN 15941:2024 for life cycle data. All relevant datasets were reviewed for completeness, consistency, and reliability, and the assessment confirmed that no data was classified as “poor” or “very poor” in quality.
Data quality assessment
Process nameSource typeSourceReference yearData categoryShare of primary data, of GWP-GHG results for A1-A3
Manufacturing of the productCollected dataEPD Owner2025Primary data3.38%
Transport of raw materials to manufacturing siteCollected dataEPD Owner2025Primary data3.14%
Production of raw materialsDatabaseEcoinvent v3.11<5 years oldSecondary data0%
Other processesDatabaseEcoinvent v3.11<5 years oldSecondary data0%
Total share of primary data, of GWP-GHG results for A1-A36.52%
The share of primary data is calculated based on GWP-GHG results. It is a simplified indicator for data quality that supports the use of more primary data to increase the representativeness of and comparability between EPDs. Note that the indicator does not capture all relevant aspects of data quality and is not comparable across product categories.
Electricity data
Electricity used in the manufacturing process in A3 (A5 for services)
Type of electricity mixResidual electricity mix on the market
Energy sourcesHydro0%
Wind0%
Solar0%
Biomass0%
Geothermal0%
Waste0%
Nuclear0%
Natural gas0%
Coal0%
Oil100%
Peat0%
Other0%
GWP-GHG intensity (kg CO2 eq./kWh)1.02 kg CO2 eq./kWh

System boundary

Description of the system boundarye) Cradle to gate with options (A1-A3 and additional modules). The additional modules may be A4 and/or A5.
Excluded modulesYes, there is an excluded module, or there are excluded modules
Justification for the omission of modulesModule C (end-of-life stage) and module D are excluded because the product meets all PCR criteria: it cannot be separated, is no longer identifiable, contains no biogenic carbon, and is not intended for consumer communication.

Declared modules

Product stageConstruction process stageUse stageEnd of life stageBeyond product life cycle
Raw material supplyTransportManufacturingTransport to siteConstruction installationUseMaintenanceRepairReplacementRefurbishmentOperational energy useOperational water useDe-construction demolitionTransportWaste processingDisposalReuse-Recovery-Recycling-potential
ModuleA1A2A3A4A5B1B2B3B4B5B6B7C1C2C3C4D
Modules declaredXXXXXNDNDNDNDNDNDNDNDNDNDNDND
GeographyGlobalGlobalMauritiusMauritiusMauritiusN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/A
Share of specific data6.52%--------------
Variation - products0%--------------
Variation - sites0%--------------
DisclaimerThe share of specific/primary data and both variations (products and sites) refer to GWP-GHG results only.

Process flow diagram(s) related images

Default scenario

Name of the default scenarioMain Scenario
Description of the default scenarioThis scenario was developed using actual site-specific data collected from Sofap for the year 2025.

Module A4: Transport to the building site

Explanatory name of the default scenario in module A4Module A4
Brief description of the default scenario in module A4Transport of the product to actual sales destinations.
Description of the default scenario in module A4In Module A4, the transportation of Sofap Permoglaze Xtreme White product from the production site to the relevant sales destinations/building sites is assessed.
Module A4 informationValueUnit
Distance
30.8
km
Capacity utilization (including empty returns)
50
%
Bulk density of transported products
1451
kg/m3
Volume capacity utilization factor
(factor: =1 or <1 or ≥1 for compressed or
nested packaged products)
1
N/A

Module A5: Installation in the building

Explanatory name of the default scenario in module A5Module A5
Brief description of the default scenario in module A5Packaging end-of-life only; no installation impact is considered.
Description of the default scenario in module A5Module A5 covers only the end-of-life treatment of packaging materials associated with the delivered product. No additional installation processes or installation-related environmental impacts are considered in this scenario.

Environmental performance

The estimated impact results are only relative statements, which do not indicate the endpoints of the impact categories, exceeding threshold values, safety margins and/or risks.

Mandatory environmental performance indicators according to EN 15804

Impact categoryIndicatorUnitA1-A3A4A5B1B2B3B4B5B6B7C1C2C3C4D
Climate change - totalGWP-totalkg CO2 eq.1.40E+04.19E-36.15E-3NDNDNDNDNDNDNDNDNDNDNDND
Climate change - fossilGWP-fossilkg CO2 eq.1.40E+03.30E-36.15E-3NDNDNDNDNDNDNDNDNDNDNDND
Climate change - biogenicGWP-biogenickg CO2 eq.1.32E-38.85E-41.60E-6NDNDNDNDNDNDNDNDNDNDNDND
Climate change - land use and land-use changeGWP-luluckg CO2 eq.1.16E-31.56E-63.39E-7NDNDNDNDNDNDNDNDNDNDNDND
Ozone depletionODPkg CFC-11 eq.2.91E-64.87E-111.42E-11NDNDNDNDNDNDNDNDNDNDNDND
AcidificationAPmol H+ eq.8.11E-38.74E-63.95E-6NDNDNDNDNDNDNDNDNDNDNDND
Eutrophication aquatic freshwaterEP-freshwaterkg P eq.4.10E-43.67E-76.33E-9NDNDNDNDNDNDNDNDNDNDNDND
Eutrophication aquatic marineEP-marinekg N eq.1.50E-32.19E-61.70E-6NDNDNDNDNDNDNDNDNDNDNDND
Eutrophication terrestrialEP-terrestrialmol N eq.1.55E-22.37E-51.64E-5NDNDNDNDNDNDNDNDNDNDNDND
Photochemical ozone formationPOCPkg NMVOC eq.6.50E-31.28E-57.22E-6NDNDNDNDNDNDNDNDNDNDNDND
Depletion of abiotic resources - minerals and metalsADP-minerals&metals1kg Sb eq.9.62E-69.43E-91.03E-9NDNDNDNDNDNDNDNDNDNDNDND
Depletion of abiotic resources - fossil fuelsADP-fossil1MJ, net calorific value2.15E+14.90E-21.26E-2NDNDNDNDNDNDNDNDNDNDNDND
Water useWDP1m3 world eq. deprived5.20E-13.11E-4-8.22E-3NDNDNDNDNDNDNDNDNDNDNDND
AcronymsGWP-fossil = Global Warming Potential fossil fuels; GWP-biogenic = Global Warming Potential biogenic; GWP-luluc = Global Warming Potential land use and land use change; ODP = Depletion potential of the stratospheric ozone layer; AP = Acidification potential, Accumulated Exceedance; EP-freshwater = Eutrophication potential, fraction of nutrients reaching freshwater end compartment; EP-marine = Eutrophication potential, fraction of nutrients reaching marine end compartment; EP-terrestrial = Eutrophication potential, Accumulated Exceedance; POCP = Formation potential of tropospheric ozone; ADP-minerals&metals = Abiotic depletion potential for non-fossil resources; ADP-fossil = Abiotic depletion for fossil resources potential; WDP = Water (user) deprivation potential, deprivation-weighted water consumption
Disclaimer 1The results of this environmental impact indicator shall be used with care as the uncertainties of these results are high or as there is limited experience with the indicator

Additional mandatory environmental performance indicators

Impact categoryIndicatorUnitA1-A3A4A5B1B2B3B4B5B6B7C1C2C3C4D
Climate change - GWP-GHGGWP-GHG1kg CO2 eq.1.40E+04.19E-36.15E-3NDNDNDNDNDNDNDNDNDNDNDND
AcronymsGWP-GHG = Global warming potential greenhouse gas.
Disclaimer 1The GWP-GHG indicator is termed GWP-IOBC/GHG in the ILCD+EPD+ data format. The indicator accounts for all greenhouse gases except biogenic carbon dioxide uptake and emissions and biogenic carbon stored in the product. As such, the indicator is identical to GWP-total except that the CF for biogenic CO2 is set to zero.

Additional voluntary environmental performance indicators according to EN 15804

Impact categoryIndicatorUnitA1-A3A4A5B1B2B3B4B5B6B7C1C2C3C4D
Particulate matter emissionsPMDisease incidence8.14E-83.16E-109.00E-11NDNDNDNDNDNDNDNDNDNDNDND
Ionizing radiation - human healthIRP1kBq U235 eq.5.68E-24.22E-53.91E-6NDNDNDNDNDNDNDNDNDNDNDND
Eco-toxicity - freshwaterETP-fw2CTUe1.62E+17.93E-31.78E-2NDNDNDNDNDNDNDNDNDNDNDND
Human toxicity - cancer effectsHTP-c2CTUh6.88E-105.45E-130.00E+0NDNDNDNDNDNDNDNDNDNDNDND
Human toxicity - non-cancer effectsHTP-nc2CTUh2.39E-83.12E-113.25E-11NDNDNDNDNDNDNDNDNDNDNDND
Land-use related impacts/soil qualitySQP2Dimensionless7.00E+04.85E-22.98E-2NDNDNDNDNDNDNDNDNDNDNDND
AcronymsPM = Potential incidence of disease due to particulate matter emissions; IRP = Potential human exposure efficiency relative to U235; ETP-fw = Potential comparative toxic unit for ecosystems; HTP-c = Potential comparative toxic unit for humans; HTP-nc = Potential comparative toxic unit for humans; SQP = Potential soil quality index.
Disclaimer 1This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
Disclaimer 2The results of this environmental impact indicator shall be used with care as the uncertainties of these results are high or as there is limited experience with the indicator.

Resource use indicators according to EN 15804

IndicatorUnitA1-A3A4A5B1B2B3B4B5B6B7C1C2C3C4D
PEREMJ, net calorific value1.20E+06.77E-41.68E-4NDNDNDNDNDNDNDNDNDNDNDND
PERMMJ, net calorific value0.00E+00.00E+00.00E+0NDNDNDNDNDNDNDNDNDNDNDND
PERTMJ, net calorific value1.20E+06.77E-41.68E-4NDNDNDNDNDNDNDNDNDNDNDND
PENREMJ, net calorific value1.93E+14.90E-22.21E+0NDNDNDNDNDNDNDNDNDNDNDND
PENRMMJ, net calorific value2.20E+00.00E+0-2.20E+0NDNDNDNDNDNDNDNDNDNDNDND
PENRTMJ, net calorific value2.15E+14.90E-21.26E-2NDNDNDNDNDNDNDNDNDNDNDND
SMkg0.00E+00.00E+00.00E+0NDNDNDNDNDNDNDNDNDNDNDND
RSFMJ, net calorific value0.00E+00.00E+00.00E+0NDNDNDNDNDNDNDNDNDNDNDND
NRSFMJ, net calorific value0.00E+00.00E+00.00E+0NDNDNDNDNDNDNDNDNDNDNDND
FWm31.26E-27.56E-6-1.91E-4NDNDNDNDNDNDNDNDNDNDNDND
AcronymsPERE = Use of renewable primary energy excluding renewable primary energy resources used as raw materials; PERM = Use of renewable primary energy resources used as raw materials; PERT = Total use of renewable primary energy resources; PENRE = Use of non-renewable primary energy excluding non-renewable primary energy resources used as raw materials; PENRM = Use of non-renewable primary energy resources used as raw materials; PENRT = Total use of non-renewable primary energy re-sources; SM = Use of secondary material; RSF = Use of renewable secondary fuels; NRSF = Use of non-renewable secondary fuels; FW = Use of net fresh water.

Waste indicators according to EN 15804

IndicatorUnitA1-A3A4A5B1B2B3B4B5B6B7C1C2C3C4D
HWDkg5.68E-40.00E+00.00E+0NDNDNDNDNDNDNDNDNDNDNDND
NHWDkg2.52E-20.00E+05.17E-2NDNDNDNDNDNDNDNDNDNDNDND
RWDkg0.00E+00.00E+00.00E+0NDNDNDNDNDNDNDNDNDNDNDND
AcronymsHWD = Hazardous waste disposed; NHWD = Non-hazardous waste disposed; RWD = Radioactive waste disposed.

Output flow indicators according to EN 15804

IndicatorUnitA1-A3A4A5B1B2B3B4B5B6B7C1C2C3C4D
CRUkg0.00E+00.00E+00.00E+0NDNDNDNDNDNDNDNDNDNDNDND
MFRkg0.00E+00.00E+00.00E+0NDNDNDNDNDNDNDNDNDNDNDND
MERkg0.00E+00.00E+00.00E+0NDNDNDNDNDNDNDNDNDNDNDND
EEEMJ, net calorific value0.00E+00.00E+00.00E+0NDNDNDNDNDNDNDNDNDNDNDND
EETMJ, net calorific value0.00E+00.00E+00.00E+0NDNDNDNDNDNDNDNDNDNDNDND
AcronymsCRU = Components for re-use; MFR = Materials for recycling; MER = Materials for energy recovery; EEE = Exported electrical energy; EET = Exported thermal energy.

Abbreviations

ADP Abiotic Depletion Potential

ADP-fossil Abiotic depletion potential for fossil resources (MJ)

ADP-minerals&metals Abiotic depletion potential for non-fossil resources (kg Sb eq.)

AP Acidification Potential (mol H eq.)

CAS No. Chemical Abstracts Service Number

CEN European Committee for Standardization

CFC-11 eq. Chlorofluorocarbon-11 Equivalents

CFR Components for Reuse (kg)

CLC Co-location centre

CO eq. Carbon Dioxide Equivalents

CPC Central product classification

EC No. European Community Number

EEE Exported Energy, Electricity (MJ)

EET Exported Energy, Thermal (MJ)

EF Environmental Footprint

EN European Norm (Standard)

EP Eutrophication Potential

EP-freshwater Freshwater eutrophication potential (kg P eq.)

EP-marine Marine eutrophication potential (kg N eq.)

EP-terrestrial Terrestrial eutrophication potential (mol N eq.)

FW Use of net fresh water (m³)

GHG Greenhouse gas

GHS Globally harmonized system of classification and labelling of chemicals

GLO Global

GPI General Programme Instructions

GRI Global Reporting Initiative

GWP Global Warming Potential (kg CO eq.)

GWP-biogenic Global Warming Potential from biogenic sources (kg CO eq.)

GWP-fossil Global Warming Potential from fossil sources (kg CO eq.)

GWP-GHG Global Warming Potential for greenhouse gases (kg CO eq.)

GWP-luluc Global Warming Potential from land use and land use change (kg CO eq.)

GWP-total Total Global Warming Potential (kg CO eq.)

HW Hazardous Waste (disposed) (kg)

ISO International Organization for Standardization

kg Kilogram

kg C Kilograms of Carbon

kg CO eq. Kilograms of Carbon Dioxide Equivalent

m³ Cubic Meter

MER Materials for Energy Recovery (kg)

MJ Megajoule

MR Material for Recycling (kg)

N eq. Nitrogen Equivalents

ND Not Declared

NHW Non-Hazardous Waste (disposed) (kg)

NMVOC Non-Methane Volatile Organic Compounds

NRSF Use of non-renewable secondary fuels (MJ)

ODP Ozone Depletion Potential (kg CFC-11 eq.)

P eq. Phosphorus Equivalents

PENRE Use of non-renewable primary energy excluding non-renewable primary energy resources used as raw materials (MJ)

PENRM Use of non-renewable primary energy resources used as raw materials (MJ)

PENRT Total use of non-renewable primary energy resources (MJ)

PERE Use of renewable primary energy excluding renewable primary energy resources used as raw materials (MJ)

PERM Use of renewable primary energy resources used as raw materials (MJ)

PERT Total use of renewable primary energy resources (MJ)

POCP Photochemical Ozone Creation Potential (kg NMVOC eq.)

RSF Use of renewable secondary fuels (MJ)

RW Radioactive Waste (disposed) (kg)

Sb eq. Antimony Equivalents

SM Use of secondary material (kg)

SVHC Substances of Very High Concern

WDP Water Deprivation Potential (m³)

References

Ecoinvent 3.11 / Ecoinvent Centre, www.ecoinvent.org

EN 15804:2012+A2:2019 / AC:2021 / Sustainability of construction works - Environmental Product Declarations - Core rules for the product category of construction products

GPI / General Programme Instructions for the International EPD® System. Version 5.0.1. www.environdec.com

ISO 14020:2000 / Environmental labels and declarations - General principles

ISO 14040/44 / DIN EN ISO 14040:2006-10 / Environmental management - Life cycle assessment - Principles and framework (ISO 14040:2006) and requirements and guidelines (ISO 14044:2006)

ISO 14025 / DIN EN ISO 14025:2009-11 / Environmental labels and declarations - Type III environmental declarations - Principles and procedures

ISO 50001:2018 / Energy management systems - Requirements with guidance for use

ISO 9001:2015 / Quality management systems - Requirements

PCR for Construction Products and Construction Services / PCR 2019:14 Construction products (EN 15804:A2). Version 2.0.1. www.environdec.com

The International EPD® System / The International EPD® System is a programme for Type III environmental declarations, maintaining a system to verify and register EPDs as well as keeping a library of EPDs and PCRs in accordance with ISO 14025. www.environdec.com

SimaPro 10.2 / SimaPro LCA Software, PRé Sustainability, the Netherlands, www.pre-sustainability.com

Sofap / www.sofap.mu

Metsims / www.metsims.com

Version history

Version 001, 2026-09-01

Original version of the EPD