EPD-IES-0030967:001
Waterproofing Line
General information
| EPD Owner | Diasen Srl |
|---|---|
| Registration number | EPD-IES-0030967:001 |
| EPD type | EPD of multiple products based on worst-case results |
| Status | Valid |
| Version date | 2026-06-18 |
| Validity date | 2031-06-17 |
| Standards conformance | ISO 14025:2006, EN 15804:2012+A2:2019/AC:2021 |
| Geographical scope | Global |
| An EPD may be updated or depublished if conditions change. This is the latest version of the EPD. | |
Programme information
| Programme | International EPD System |
|---|---|
| Address | EPD International AB Box 210 60 SE-100 31 Stockholm Sweden |
| Website | www.environdec.com |
| support@environdec.com |
Product category rules
| CEN standard EN 15804 serves as the Core Product Category Rules (PCR) | |
| Product Category Rules (PCR) | 2019:14 Construction products (EN 15804+A2) (version 2.0.1) 2.0.1 |
|---|---|
| PCR review was conducted by | The Technical Committee of the International EPD System. See www.environdec.com for a list of members. Review chair: Rob Rouwette (chair), Noa Meron (co-chair). The review panel may be contacted via the Secretariat www.environdec.com/support. |
Verification
| Independent third-party verification of the declaration and data, according to ISO 14025:2006, via | |
|---|---|
| Third-party verifier | Certiquality Srl |
| Accredited by | Accredia |
| Accredited certification body address | Italy |
| Procedure for follow-up of data during EPD validity involves third party verifier | |
| *EPD Process Certification involves an accredited certification body certifying and periodically auditing the EPD process and conducting external and independent verification of EPDs that are regularly published. More information can be found in the General Programme Instructions on www.environdec.com. | |
Ownership and limitation on use of EPD
Limitations
EPDs within the same product category but published in different EPD programmes, may not be comparable. For two EPDs to be comparable, they shall be based on the same PCR (including the same first-digit version number) or be based on fully aligned PCRs or versions of PCRs; cover products with identical functions, technical performances and use (e.g. identical declared/functional units); have identical scope in terms of included life-cycle stages (unless the excluded life-cycle stage is demonstrated to be insignificant); apply identical impact assessment methods (including the same version of characterisation factors); and be valid at the time of comparison.
Ownership
The EPD Owner has the sole ownership, liability, and responsibility for the EPD.
Information about EPD Owner
| EPD Owner | Diasen Srl |
|---|---|
| Contact person name | Giulia Mengotti |
| Contact person e-mail | giulia.mengotti@diasen.com |
| Organisation address | Zona industriale Berbentina, 5, 60041 - Sassoferrato (AN) - Italy 60041 Sassoferrato Italy |
| LCA Practitioner | Roberto Petrucci, roberto.petrucci@unipg.it |
Description of the organisation of the EPD Owner
Diasen is an Italian company operating in the architecture and sustainable building materials sector, committed to developing biophilic solutions and systems that foster more balanced and mutually beneficial relationships between humans and nature, and between built environments and living cycles. Its solutions address needs for comfort and aesthetic quality—such as thermal and acoustic insulation, surface protection, and spatial enhancement—and are designed for public construction, private architecture, and design, with particular attention to how materials interact over time with environmental factors. The company’s activities are guided by compliance with environmental regulations and by a structured approach aimed at identifying, monitoring, and reducing impacts. Since 2007, Diasen has adopted a certified Environmental Management System in accordance with ISO 14001:2015, alongside ISO 9001:2015 and ISO 45001:2018 standards. Diasen is also a certified B Corp®, demonstrating a commitment verified by independent third parties that attest to its social and environmental responsibility. More than 40 products have undergone LEED®, WELL®, and BREEAM® mapping to support their integration into sustainable building protocols and advanced, high-performance architectural frameworks. Operational practices include monitoring material flows to limit waste generation and increase recovery where technically feasible. Research and Development (R&D) focuses on integrating raw materials derived from industrial by-products and recoverable streams, prioritizing durability and long-term resource efficiency—key indicators of quality in relation to market outputs. Product and solution development is oriented toward improving thermal performance and reducing building energy demand. At the same time, the company places strong emphasis on indoor environmental quality and on the long-term interaction between materials, people, and ecosystems, as these aspects are integral to its mission: creating authentic spaces and environments that support human well-being, combining both functional and experiential value.
Organisation images
Organisation logo
Product information
Acriflex Rapido
| Product name | Acriflex Rapido |
|---|---|
| Product identification | - EN 14891: Liquid-applied water impermeable products for use beneath ceramic tiling bonded with adhesives (e.g., for balconies, terraces, and wet areas). |
| Product description | High–performance, single-component liquid waterproofing membrane formulated with advanced elastomeric resins. Engineered for maximum adaptability, it can be applied at +1 °C and in high–humidity conditions, resisting rain and water stagnation within 2–4 hours. This ready–to–use continuous barrier is ideal for roofs, terraces, and damp substrates, and is certified for asbestos encapsulation. Compliant with EOTA TR 003 and EN 14891 standards, it is a VOC–free solution (Dir. 2004/42/EC) ensuring maximum environmental health. |
| Technical purpose of product | The products belonging to the Waterproofing line consist of liquid-applied membranes, multi-component hybrid coatings, and water-based bituminous compounds. They are intended for both interior and exterior applications in residential, public, commercial, and sports buildings, as well as for underground structures and historical restoration. Their primary technical functions include providing continuous watertight barriers against rainwater, moisture, and extreme hydrostatic pressure, while offering high elasticity, crack-bridging capacity, and rapid resistance to early washout. Additionally, specific formulations within the line serve specialized purposes such as urban heat island mitigation through ultra-high solar reflectance, and environmental remediation via certified asbestos encapsulation. They are designed for application on a wide variety of substrates—including concrete, tiles, existing bituminous membranes, wood, and masonry—to significantly enhance the envelope's durability and long-term protection against weathering. |
| Manufacturing or service provision description | The manufacturing process begins with the receipt and storage of raw materials from suppliers. Depending on their characteristics, materials arrive in plastic or metal buckets, kraft paper and plastic bags, or unpackaged in bulk; the latter are stored directly in dedicated silos. These materials are fed into the liquid production mixer either automatically or manually. Packaged ingredients stored in the warehouse are subsequently transported to the mixing station via electric forklifts. For cork–based products, the raw cork undergoes a preliminary milling stage before being transferred to the final production phase. Production is a batch (discontinuous) process where all components are mechanically blended. The finished product is then packaged in buckets, palletized on wooden pallets, secured with a protective polymer hooding film, and stored in the finished goods warehouse. Quality control is strictly performed both during production and prior to shipment This manufacturing process requires water and operates virtually as a closed–loop system, generating no material scraps. Water from the municipal aqueduct is used exclusively to clean the mixer between different production cycles and is subsequently discharged as industrial wastewater. |
| Material properties | Volumetric mass density: 1188 kg/m3 Volumetric mass density: 1188 kg/m3 |
| Manufacturing site | DIASEN SRL ZONA INDUSTRIALE BERBENTINA 5 60041 SASSOFERRATO Italy |
| UN CPC code | 35110. Paints and varnishes and related products |
| Geographical scope | Global |
Product images
Acriflex X-Pro
| Product name | Acriflex X-Pro |
|---|---|
| Product identification | - EN 14891: Liquid-applied water impermeable products for use beneath ceramic tiling bonded with adhesives (e.g., for balconies, terraces, and wet areas). |
| Product description | Liquid waterproofing membrane formulated with elastomeric binders and high–modulus elastic fibres. Designed as a seamless, walkable shield, it resists UV rays and water stagnation while maintaining high flexibility even at low temperatures. Ideal for exposed applications, it harmonizes structural protection with aesthetic durability. Certified according to EOTA TR 003 and EN 14891, it is a VOC–free solution (Dir. 2004/42/EC) ensuring superior indoor and outdoor air quality. |
| Technical purpose of product | The products belonging to the Waterproofing line consist of liquid-applied membranes, multi-component hybrid coatings, and water-based bituminous compounds. They are intended for both interior and exterior applications in residential, public, commercial, and sports buildings, as well as for underground structures and historical restoration. Their primary technical functions include providing continuous watertight barriers against rainwater, moisture, and extreme hydrostatic pressure, while offering high elasticity, crack-bridging capacity, and rapid resistance to early washout. Additionally, specific formulations within the line serve specialized purposes such as urban heat island mitigation through ultra-high solar reflectance, and environmental remediation via certified asbestos encapsulation. They are designed for application on a wide variety of substrates—including concrete, tiles, existing bituminous membranes, wood, and masonry—to significantly enhance the envelope's durability and long-term protection against weathering. |
| Manufacturing or service provision description | The manufacturing process begins with the receipt and storage of raw materials from suppliers. Depending on their characteristics, materials arrive in plastic or metal buckets, kraft paper and plastic bags, or unpackaged in bulk; the latter are stored directly in dedicated silos. These materials are fed into the liquid production mixer either automatically or manually. Packaged ingredients stored in the warehouse are subsequently transported to the mixing station via electric forklifts. For cork–based products, the raw cork undergoes a preliminary milling stage before being transferred to the final production phase. Production is a batch (discontinuous) process where all components are mechanically blended. The finished product is then packaged in buckets, palletized on wooden pallets, secured with a protective polymer hooding film, and stored in the finished goods warehouse. Quality control is strictly performed both during production and prior to shipment This manufacturing process requires water and operates virtually as a closed–loop system, generating no material scraps. Water from the municipal aqueduct is used exclusively to clean the mixer between different production cycles and is subsequently discharged as industrial wastewater. |
| Material properties | Volumetric mass density: 1432 kg/m3 Volumetric mass density: 1432 kg/m3 |
| Manufacturing site | DIASEN SRL ZONA INDUSTRIALE BERBENTINA 5 60041 SASSOFERRATO Italy |
| UN CPC code | 35110. Paints and varnishes and related products |
| Geographical scope | Global |
Product images
Acriflex Fybro (A+B)
| Product name | Acriflex Fybro (A+B) |
|---|---|
| Product identification | - EN 14891: Liquid-applied water impermeable products for use beneath ceramic tiling bonded with adhesives (e.g., for balconies, terraces, and wet areas). |
| Product description | Two–component, fibre-reinforced waterproofing shield formulated with acrylic binders and high–strength cements. The elastic matrix ensures exceptional crack–bridging capacity (3.2 mm) and an elongation of 149% without the need for reinforcement mesh. Engineered to withstand extreme hydraulic pressure (9.5 bar), freeze-thaw cycles, and UV exposure, it is the ideal interface for restoring bituminous membranes and water–retaining structures. A VOC–free solution (Dir. 2004/42/EC) for sustainable building protection. |
| Technical purpose of product | The products belonging to the Waterproofing line consist of liquid-applied membranes, multi-component hybrid coatings, and water-based bituminous compounds. They are intended for both interior and exterior applications in residential, public, commercial, and sports buildings, as well as for underground structures and historical restoration. Their primary technical functions include providing continuous watertight barriers against rainwater, moisture, and extreme hydrostatic pressure, while offering high elasticity, crack-bridging capacity, and rapid resistance to early washout. Additionally, specific formulations within the line serve specialized purposes such as urban heat island mitigation through ultra-high solar reflectance, and environmental remediation via certified asbestos encapsulation. They are designed for application on a wide variety of substrates—including concrete, tiles, existing bituminous membranes, wood, and masonry—to significantly enhance the envelope's durability and long-term protection against weathering. |
| Manufacturing or service provision description | The manufacturing process begins with the receipt and storage of raw materials from suppliers. Depending on their characteristics, materials arrive in plastic or metal buckets, kraft paper and plastic bags, or unpackaged in bulk; the latter are stored directly in dedicated silos. These materials are fed into the liquid production mixer either automatically or manually. Packaged ingredients stored in the warehouse are subsequently transported to the mixing station via electric forklifts. For cork–based products, the raw cork undergoes a preliminary milling stage before being transferred to the final production phase. Production is a batch (discontinuous) process where all components are mechanically blended. The finished product is then packaged in buckets, palletized on wooden pallets, secured with a protective polymer hooding film, and stored in the finished goods warehouse. Quality control is strictly performed both during production and prior to shipment This manufacturing process requires water and operates virtually as a closed–loop system, generating no material scraps. Water from the municipal aqueduct is used exclusively to clean the mixer between different production cycles and is subsequently discharged as industrial wastewater. |
| Material properties | Volumetric mass density: 1725 kg/m3 Volumetric mass density: 1725 kg/m3 |
| Manufacturing site | DIASEN SRL ZONA INDUSTRIALE BERBENTINA 5 60041 SASSOFERRATO Italy |
| UN CPC code | 35110. Paints and varnishes and related products |
| Geographical scope | Global |
Product images
Acriflex Pro
| Product name | Acriflex Pro |
|---|---|
| Product identification | - EN 14891: Liquid-applied water impermeable products for use beneath ceramic tiling bonded with adhesives (e.g., for balconies, terraces, and wet areas). |
| Product description | Water–based, single-component liquid waterproofing formulated with latest–generation elastomeric resins and nanotechnology fillers. This ready–to–use solution ensures a continuous watertight seal on flat roofs, pitched roofs, and wet areas, maintaining high flexibility at low temperatures. Certified for asbestos encapsulation (D.M. 20/08/1999 and UNI 10686), it harmonizes environmental safety with high resistance to water stagnation and weathering. An exposed finish available in various colours, combining structural durability with VOC–free compliance (Dir. 2004/42/EC). |
| Technical purpose of product | The products belonging to the Waterproofing line consist of liquid-applied membranes, multi-component hybrid coatings, and water-based bituminous compounds. They are intended for both interior and exterior applications in residential, public, commercial, and sports buildings, as well as for underground structures and historical restoration. Their primary technical functions include providing continuous watertight barriers against rainwater, moisture, and extreme hydrostatic pressure, while offering high elasticity, crack-bridging capacity, and rapid resistance to early washout. Additionally, specific formulations within the line serve specialized purposes such as urban heat island mitigation through ultra-high solar reflectance, and environmental remediation via certified asbestos encapsulation. They are designed for application on a wide variety of substrates—including concrete, tiles, existing bituminous membranes, wood, and masonry—to significantly enhance the envelope's durability and long-term protection against weathering. |
| Manufacturing or service provision description | The manufacturing process begins with the receipt and storage of raw materials from suppliers. Depending on their characteristics, materials arrive in plastic or metal buckets, kraft paper and plastic bags, or unpackaged in bulk; the latter are stored directly in dedicated silos. These materials are fed into the liquid production mixer either automatically or manually. Packaged ingredients stored in the warehouse are subsequently transported to the mixing station via electric forklifts. For cork–based products, the raw cork undergoes a preliminary milling stage before being transferred to the final production phase. Production is a batch (discontinuous) process where all components are mechanically blended. The finished product is then packaged in buckets, palletized on wooden pallets, secured with a protective polymer hooding film, and stored in the finished goods warehouse. Quality control is strictly performed both during production and prior to shipment This manufacturing process requires water and operates virtually as a closed–loop system, generating no material scraps. Water from the municipal aqueduct is used exclusively to clean the mixer between different production cycles and is subsequently discharged as industrial wastewater. |
| Material properties | Volumetric mass density: 1541 kg/m3 Volumetric mass density: 1541 kg/m3 |
| Manufacturing site | DIASEN SRL ZONA INDUSTRIALE BERBENTINA 5 60041 SASSOFERRATO Italy |
| UN CPC code | 35110. Paints and varnishes and related products |
| Geographical scope | Global |
Product images
Ultrabit
| Product name | Ultrabit |
|---|---|
| Product identification | - EN 14891: Liquid-applied water impermeable products for use beneath ceramic tiling bonded with adhesives (e.g., for balconies, terraces, and wet areas). |
| Product description | Ready–to–use, water–based single-component bituminous paste formulated with recycled rubber to combine technical performance with environmental sustainability. This high–build waterproofing agent is designed for levelling and protecting external surfaces, allowing for singl×10-layer applications up to 3 mm, significantly reducing installation time. Engineered for critical weather conditions (+5 °C and 98% RH), it offers immediate washout resistance (30 minutes) and high structural movement absorption. |
| Technical purpose of product | The products belonging to the Waterproofing line consist of liquid-applied membranes, multi-component hybrid coatings, and water-based bituminous compounds. They are intended for both interior and exterior applications in residential, public, commercial, and sports buildings, as well as for underground structures and historical restoration. Their primary technical functions include providing continuous watertight barriers against rainwater, moisture, and extreme hydrostatic pressure, while offering high elasticity, crack-bridging capacity, and rapid resistance to early washout. Additionally, specific formulations within the line serve specialized purposes such as urban heat island mitigation through ultra-high solar reflectance, and environmental remediation via certified asbestos encapsulation. They are designed for application on a wide variety of substrates—including concrete, tiles, existing bituminous membranes, wood, and masonry—to significantly enhance the envelope's durability and long-term protection against weathering. |
| Manufacturing or service provision description | The manufacturing process begins with the receipt and storage of raw materials from suppliers. Depending on their characteristics, materials arrive in plastic or metal buckets, kraft paper and plastic bags, or unpackaged in bulk; the latter are stored directly in dedicated silos. These materials are fed into the liquid production mixer either automatically or manually. Packaged ingredients stored in the warehouse are subsequently transported to the mixing station via electric forklifts. For cork–based products, the raw cork undergoes a preliminary milling stage before being transferred to the final production phase. Production is a batch (discontinuous) process where all components are mechanically blended. The finished product is then packaged in buckets, palletized on wooden pallets, secured with a protective polymer hooding film, and stored in the finished goods warehouse. Quality control is strictly performed both during production and prior to shipment This manufacturing process requires water and operates virtually as a closed–loop system, generating no material scraps. Water from the municipal aqueduct is used exclusively to clean the mixer between different production cycles and is subsequently discharged as industrial wastewater. |
| Material properties | Volumetric mass density: 1007 kg/m3 Volumetric mass density: 1007 kg/m3 |
| Manufacturing site | DIASEN SRL ZONA INDUSTRIALE BERBENTINA 5 60041 SASSOFERRATO Italy |
| UN CPC code | 35110. Paints and varnishes and related products |
| Geographical scope | Global |
Product images
Oriplast Reflex
| Product name | Oriplast Reflex |
|---|---|
| Product identification | - EN 14891: Liquid-applied water impermeable products for use beneath ceramic tiling bonded with adhesives (e.g., for balconies, terraces, and wet areas). |
| Product description | High–performance waterproofing membrane formulated with nanotechnology fillers for high solar reflectance (SRI = 102). Designed as an "active thermal skin," it reflects over 90% of solar radiation, reducing surface temperatures by up to 48 °C and drastically improving indoor comfort. This elastic matrix (327% elongation) optimizes photovoltaic panel efficiency and ensures exceptional hydraulic tightness (7 atm). A fir×10-safe solution (Class B–s2, d0) that harmonizes structural protection with urban heat island mitigation. VOC–free (Dir. 2004/42/EC). |
| Technical purpose of product | The products belonging to the Waterproofing line consist of liquid-applied membranes, multi-component hybrid coatings, and water-based bituminous compounds. They are intended for both interior and exterior applications in residential, public, commercial, and sports buildings, as well as for underground structures and historical restoration. Their primary technical functions include providing continuous watertight barriers against rainwater, moisture, and extreme hydrostatic pressure, while offering high elasticity, crack-bridging capacity, and rapid resistance to early washout. Additionally, specific formulations within the line serve specialized purposes such as urban heat island mitigation through ultra-high solar reflectance, and environmental remediation via certified asbestos encapsulation. They are designed for application on a wide variety of substrates—including concrete, tiles, existing bituminous membranes, wood, and masonry—to significantly enhance the envelope's durability and long-term protection against weathering. |
| Manufacturing or service provision description | The manufacturing process begins with the receipt and storage of raw materials from suppliers. Depending on their characteristics, materials arrive in plastic or metal buckets, kraft paper and plastic bags, or unpackaged in bulk; the latter are stored directly in dedicated silos. These materials are fed into the liquid production mixer either automatically or manually. Packaged ingredients stored in the warehouse are subsequently transported to the mixing station via electric forklifts. For cork–based products, the raw cork undergoes a preliminary milling stage before being transferred to the final production phase. Production is a batch (discontinuous) process where all components are mechanically blended. The finished product is then packaged in buckets, palletized on wooden pallets, secured with a protective polymer hooding film, and stored in the finished goods warehouse. Quality control is strictly performed both during production and prior to shipment This manufacturing process requires water and operates virtually as a closed–loop system, generating no material scraps. Water from the municipal aqueduct is used exclusively to clean the mixer between different production cycles and is subsequently discharged as industrial wastewater. |
| Material properties | Volumetric mass density: 1468 kg/m3 Volumetric mass density: 1468 kg/m3 |
| Manufacturing site | DIASEN SRL ZONA INDUSTRIALE BERBENTINA 5 60041 SASSOFERRATO Italy |
| UN CPC code | 35110. Paints and varnishes and related products |
| Geographical scope | Global |
Product images
Ultragum
| Product name | Ultragum |
|---|---|
| Product identification | - EN 14891: Liquid-applied water impermeable products for use beneath ceramic tiling bonded with adhesives (e.g., for balconies, terraces, and wet areas). |
| Product description | High–resilience, water–based single-component bituminous membrane for critical climates. It ensures exceptional resistance to early washout even at low temperatures (+5 °C) and extreme humidity (98%). The elastomeric matrix combines high elongation (336%) with certified thermal stability (100 days at 80 °C), ensuring maximum envelope durability against premature aging. Featuring superior substrate adhesion and fire safety (Class B–ROOF t4), it harmonizes winter construction efficiency with sustainable structural protection. |
| Technical purpose of product | The products belonging to the Waterproofing line consist of liquid-applied membranes, multi-component hybrid coatings, and water-based bituminous compounds. They are intended for both interior and exterior applications in residential, public, commercial, and sports buildings, as well as for underground structures and historical restoration. Their primary technical functions include providing continuous watertight barriers against rainwater, moisture, and extreme hydrostatic pressure, while offering high elasticity, crack-bridging capacity, and rapid resistance to early washout. Additionally, specific formulations within the line serve specialized purposes such as urban heat island mitigation through ultra-high solar reflectance, and environmental remediation via certified asbestos encapsulation. They are designed for application on a wide variety of substrates—including concrete, tiles, existing bituminous membranes, wood, and masonry—to significantly enhance the envelope's durability and long-term protection against weathering. |
| Manufacturing or service provision description | The manufacturing process begins with the receipt and storage of raw materials from suppliers. Depending on their characteristics, materials arrive in plastic or metal buckets, kraft paper and plastic bags, or unpackaged in bulk; the latter are stored directly in dedicated silos. These materials are fed into the liquid production mixer either automatically or manually. Packaged ingredients stored in the warehouse are subsequently transported to the mixing station via electric forklifts. For cork–based products, the raw cork undergoes a preliminary milling stage before being transferred to the final production phase. Production is a batch (discontinuous) process where all components are mechanically blended. The finished product is then packaged in buckets, palletized on wooden pallets, secured with a protective polymer hooding film, and stored in the finished goods warehouse. Quality control is strictly performed both during production and prior to shipment This manufacturing process requires water and operates virtually as a closed–loop system, generating no material scraps. Water from the municipal aqueduct is used exclusively to clean the mixer between different production cycles and is subsequently discharged as industrial wastewater. |
| Material properties | Volumetric mass density: 1637 kg/m3 Volumetric mass density: 1637 kg/m3 |
| Manufacturing site | DIASEN SRL ZONA INDUSTRIALE BERBENTINA 5 60041 SASSOFERRATO Italy |
| UN CPC code | 35110. Paints and varnishes and related products |
| Geographical scope | Global |
Product images
Watstop
| Product name | Watstop |
|---|---|
| Product identification | - EN 14891: Liquid-applied water impermeable products for use beneath ceramic tiling bonded with adhesives (e.g., for balconies, terraces, and wet areas). |
| Product description | Three-component hybrid technology waterproofing system formulated with epoxy resins and special osmotic cements for structures in extreme conditions. It ensures exceptional hydraulic tightness up to 9.5 atm, acting effectively in both positive and negative pressure (UNI EN 12390–8). Engineered as a molecular moisture barrier, it provides a high–resistance interface for underground walls and damp substrates, ensuring structural integrity where traditional systems fail. |
| Technical purpose of product | The products belonging to the Waterproofing line consist of liquid-applied membranes, multi-component hybrid coatings, and water-based bituminous compounds. They are intended for both interior and exterior applications in residential, public, commercial, and sports buildings, as well as for underground structures and historical restoration. Their primary technical functions include providing continuous watertight barriers against rainwater, moisture, and extreme hydrostatic pressure, while offering high elasticity, crack-bridging capacity, and rapid resistance to early washout. Additionally, specific formulations within the line serve specialized purposes such as urban heat island mitigation through ultra-high solar reflectance, and environmental remediation via certified asbestos encapsulation. They are designed for application on a wide variety of substrates—including concrete, tiles, existing bituminous membranes, wood, and masonry—to significantly enhance the envelope's durability and long-term protection against weathering. |
| Manufacturing or service provision description | The manufacturing process begins with the receipt and storage of raw materials from suppliers. Depending on their characteristics, materials arrive in plastic or metal buckets, kraft paper and plastic bags, or unpackaged in bulk; the latter are stored directly in dedicated silos. These materials are fed into the liquid production mixer either automatically or manually. Packaged ingredients stored in the warehouse are subsequently transported to the mixing station via electric forklifts. For cork–based products, the raw cork undergoes a preliminary milling stage before being transferred to the final production phase. Production is a batch (discontinuous) process where all components are mechanically blended. The finished product is then packaged in buckets, palletized on wooden pallets, secured with a protective polymer hooding film, and stored in the finished goods warehouse. Quality control is strictly performed both during production and prior to shipment This manufacturing process requires water and operates virtually as a closed–loop system, generating no material scraps. Water from the municipal aqueduct is used exclusively to clean the mixer between different production cycles and is subsequently discharged as industrial wastewater. |
| Material properties | Volumetric mass density: 1623 kg/m3 Volumetric mass density: 1623 kg/m3 |
| Manufacturing site | DIASEN SRL ZONA INDUSTRIALE BERBENTINA 5 60041 SASSOFERRATO Italy |
| UN CPC code | 35110. Paints and varnishes and related products |
| Geographical scope | Global |
Product images
Revela Zero
| Product name | Revela Zero |
|---|---|
| Product identification | - EN 14891: Liquid-applied water impermeable products for use beneath ceramic tiling bonded with adhesives (e.g., for balconies, terraces, and wet areas). |
| Product description | Clear, deep–penetrating siloxane coating designed to protect the breathing nature of stone, brick, and concrete. It creates an invisible hydrophobic barrier that repels rainwater while allowing interior vapor to escape. By preventing frost damage and moisture ingress, it preserves the natural soul of the masonry without altering its visual identity. |
| Technical purpose of product | The products belonging to the Waterproofing line consist of liquid-applied membranes, multi-component hybrid coatings, and water-based bituminous compounds. They are intended for both interior and exterior applications in residential, public, commercial, and sports buildings, as well as for underground structures and historical restoration. Their primary technical functions include providing continuous watertight barriers against rainwater, moisture, and extreme hydrostatic pressure, while offering high elasticity, crack-bridging capacity, and rapid resistance to early washout. Additionally, specific formulations within the line serve specialized purposes such as urban heat island mitigation through ultra-high solar reflectance, and environmental remediation via certified asbestos encapsulation. They are designed for application on a wide variety of substrates—including concrete, tiles, existing bituminous membranes, wood, and masonry—to significantly enhance the envelope's durability and long-term protection against weathering. |
| Manufacturing or service provision description | The manufacturing process begins with the receipt and storage of raw materials from suppliers. Depending on their characteristics, materials arrive in plastic or metal buckets, kraft paper and plastic bags, or unpackaged in bulk; the latter are stored directly in dedicated silos. These materials are fed into the liquid production mixer either automatically or manually. Packaged ingredients stored in the warehouse are subsequently transported to the mixing station via electric forklifts. For cork–based products, the raw cork undergoes a preliminary milling stage before being transferred to the final production phase. Production is a batch (discontinuous) process where all components are mechanically blended. The finished product is then packaged in buckets, palletized on wooden pallets, secured with a protective polymer hooding film, and stored in the finished goods warehouse. Quality control is strictly performed both during production and prior to shipment This manufacturing process requires water and operates virtually as a closed–loop system, generating no material scraps. Water from the municipal aqueduct is used exclusively to clean the mixer between different production cycles and is subsequently discharged as industrial wastewater. |
| Material properties | Volumetric mass density: 1401 kg/m3 Volumetric mass density: 1401 kg/m3 |
| Manufacturing site | DIASEN SRL ZONA INDUSTRIALE BERBENTINA 5 60041 SASSOFERRATO Italy |
| UN CPC code | 35110. Paints and varnishes and related products |
| Geographical scope | Global |
Product images
Acriflex Reflex
| Product name | Acriflex Reflex |
|---|---|
| Product identification | - EN 14891: Liquid-applied water impermeable products for use beneath ceramic tiling bonded with adhesives (e.g., for balconies, terraces, and wet areas). |
| Product description | High–performance waterproofing membrane formulated with nanotechnology fillers for high solar reflectance (SRI = 102). Designed as an "active thermal skin," it reflects over 90% of solar radiation, reducing surface temperatures by up to 48 °C and drastically improving indoor comfort. This elastic matrix (327% elongation) optimizes photovoltaic panel efficiency and ensures exceptional hydraulic tightness (7 atm). A fir×10-safe solution (Class B–s2, d0) that harmonizes structural protection with urban heat island mitigation. VOC–free (Dir. 2004/42/EC). |
| Technical purpose of product | The products belonging to the Waterproofing line consist of liquid-applied membranes, multi-component hybrid coatings, and water-based bituminous compounds. They are intended for both interior and exterior applications in residential, public, commercial, and sports buildings, as well as for underground structures and historical restoration. Their primary technical functions include providing continuous watertight barriers against rainwater, moisture, and extreme hydrostatic pressure, while offering high elasticity, crack-bridging capacity, and rapid resistance to early washout. Additionally, specific formulations within the line serve specialized purposes such as urban heat island mitigation through ultra-high solar reflectance, and environmental remediation via certified asbestos encapsulation. They are designed for application on a wide variety of substrates—including concrete, tiles, existing bituminous membranes, wood, and masonry—to significantly enhance the envelope's durability and long-term protection against weathering. |
| Manufacturing or service provision description | The manufacturing process begins with the receipt and storage of raw materials from suppliers. Depending on their characteristics, materials arrive in plastic or metal buckets, kraft paper and plastic bags, or unpackaged in bulk; the latter are stored directly in dedicated silos. These materials are fed into the liquid production mixer either automatically or manually. Packaged ingredients stored in the warehouse are subsequently transported to the mixing station via electric forklifts. For cork–based products, the raw cork undergoes a preliminary milling stage before being transferred to the final production phase. Production is a batch (discontinuous) process where all components are mechanically blended. The finished product is then packaged in buckets, palletized on wooden pallets, secured with a protective polymer hooding film, and stored in the finished goods warehouse. Quality control is strictly performed both during production and prior to shipment This manufacturing process requires water and operates virtually as a closed–loop system, generating no material scraps. Water from the municipal aqueduct is used exclusively to clean the mixer between different production cycles and is subsequently discharged as industrial wastewater. |
| Material properties | Volumetric mass density: 1468 kg/m3 Volumetric mass density: 1468 kg/m3 |
| Manufacturing site | DIASEN SRL ZONA INDUSTRIALE BERBENTINA 5 60041 SASSOFERRATO Italy |
| UN CPC code | 35110. Paints and varnishes and related products |
| Geographical scope | Global |
Product images
L'Antipioggia Terrazzi
| Product name | L'Antipioggia Terrazzi |
|---|---|
| Product identification | - EN 14891: Liquid-applied water impermeable products for use beneath ceramic tiling bonded with adhesives (e.g., for balconies, terraces, and wet areas). |
| Product description | High–performance, water–based transparent liquid waterproofing, ideal as a non–invasive solution for existing paved surfaces. It eliminates infiltrations without demolition, preserving the original aesthetics of the substrate. It ensures continuous hydrophobic protection and excellent structural durability, harmonizing architectural restoration efficiency with maximum chemical–physical resistance and environmental health. |
| Technical purpose of product | The products belonging to the Waterproofing line consist of liquid-applied membranes, multi-component hybrid coatings, and water-based bituminous compounds. They are intended for both interior and exterior applications in residential, public, commercial, and sports buildings, as well as for underground structures and historical restoration. Their primary technical functions include providing continuous watertight barriers against rainwater, moisture, and extreme hydrostatic pressure, while offering high elasticity, crack-bridging capacity, and rapid resistance to early washout. Additionally, specific formulations within the line serve specialized purposes such as urban heat island mitigation through ultra-high solar reflectance, and environmental remediation via certified asbestos encapsulation. They are designed for application on a wide variety of substrates—including concrete, tiles, existing bituminous membranes, wood, and masonry—to significantly enhance the envelope's durability and long-term protection against weathering. |
| Manufacturing or service provision description | The manufacturing process begins with the receipt and storage of raw materials from suppliers. Depending on their characteristics, materials arrive in plastic or metal buckets, kraft paper and plastic bags, or unpackaged in bulk; the latter are stored directly in dedicated silos. These materials are fed into the liquid production mixer either automatically or manually. Packaged ingredients stored in the warehouse are subsequently transported to the mixing station via electric forklifts. For cork–based products, the raw cork undergoes a preliminary milling stage before being transferred to the final production phase. Production is a batch (discontinuous) process where all components are mechanically blended. The finished product is then packaged in buckets, palletized on wooden pallets, secured with a protective polymer hooding film, and stored in the finished goods warehouse. Quality control is strictly performed both during production and prior to shipment This manufacturing process requires water and operates virtually as a closed–loop system, generating no material scraps. Water from the municipal aqueduct is used exclusively to clean the mixer between different production cycles and is subsequently discharged as industrial wastewater. |
| Material properties | Volumetric mass density: 955 kg/m3 Volumetric mass density: 955 kg/m3 |
| Manufacturing site | DIASEN SRL ZONA INDUSTRIALE BERBENTINA 5 60041 SASSOFERRATO Italy |
| UN CPC code | 35110. Paints and varnishes and related products |
| Geographical scope | Global |
Product images
Technical characteristics and performance
Technical performance
| Product name | Category | Water permeability | Resistance to washing away | Elongation at break (%) | Tensile Strength (N/mm²) | Adhesion test on concrete Tensile mode (N/mm²) | Accelerated weathering test | Viscosity at 23 °C (cPs) | Total heavy metals | Test VOC | Flexibility – cold conditions (°C) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Acriflex Rapido | Liquid Waterproofing Membrane | No permeability | 20 min | 160 ± 10 | 1,4 ± 0,5 | 0,536 Failure typology A/B | 1680 hours (10 years) | 20000 ± 5000 | Pass | VOC–free | - |
| Acriflex X–Pro | Liquid Waterproofing Membrane | No permeability | - | 90 | 4 | 0.5 | 1680 hours (10 years) | 20000 ± 5000 | Pass | VOC-free | -25 |
| Acriflex Fybro (A+B) | Liquid Waterproofing Membrane | 9.4 atm | - | 149.33 | 2.37 | 1.089 | 1680 hours (10 years) | - | Pass | VOC-free | -26 |
| Acriflex Pro | Liquid Waterproofing Membrane | succeeded | - | 64.40 | 1.5 | 0.5 | - | 18000 ± 5000 | Pass | VOC-free | - |
| Oriplast Reflex | Liquid Waterproofing Membrane | 7 atm | - | 327 | 1.20 | 0.78 | 3000 hours (> 17 years) | 50000 – 65000 | - | - | 12 mm |
| Ultragum | Liquid Waterproofing Membrane | ||||||||||
| Ultrabit | Liquid Waterproofing Membrane | ||||||||||
| Watstop (A+B+C) | Liquid Waterproofing Membrane | ||||||||||
| Acriflex Reflex | Liquid Waterproofing Membrane | ||||||||||
| Antipioggia Terrazzi | Liquid Waterproofing Membrane | ||||||||||
| Revela Zero | Liquid Waterproofing Membrane |
Content declaration
| Content declaration of multiple products | The content declaration in this multi-product EPD represents a conservative formulation designed to reflect the worst-case scenario among the products included in the Waterproofing Line. This ensures that the environmental impacts declared represent the upper limit for all variations within the product group. |
|---|---|
| Hazardous and toxic substances | The product does not contain any substances from the SVHC candidate list in concentrations exceeding 0.1% of its weight. |
Product content
| Content name | Mass, kg | Post-consumer recycled material, mass-% of product | Biogenic material, mass-% of product | Biogenic material1, kg C/declared unit |
|---|---|---|---|---|
| Water | 0.459 | 0 | 0 | 0 |
| Quartz | 0.15 | 0 | 0 | 0 |
| Talcum Powder | 0.1 | 0 | 0 | 0 |
| Cement | 0.185 | 0 | 0 | 0 |
| PAN fibers | 0.005 | 0 | 0 | 0 |
| Organic Additives | 0.027 | 0 | 0 | 0 |
| Inorganic Additives | 0.01 | 0 | 0 | 0 |
| Titanium Dioxide | 0.05 | 0 | 0 | 0 |
| Recycled Rubber | 0.082 | 0 | 0 | 0 |
| Siloxane Emulsion | 0.062 | 0 | 0.725 | 0.007 |
| Acrylic Resin | 0.317 | 0 | 0 | 0 |
| Epoxy Resin | 0.09 | 0 | 0 | 0 |
| Aliphatic Diammine | 0.04 | 0 | 1.38 | 0.014 |
| Total | 1.577 | 0 | 2.105 | 0.021 |
| Note 1 | 1 kg biogenic carbon is equivalent to 44/12 kg of CO2 | |||
Packaging materials
| Material name | Mass, kg | Mass-% (versus the product) | Biogenic material1, kg C/declared unit |
|---|---|---|---|
| Wood | 0.0334 | 3.345 | 0.016 |
| PP bucket | 0.157 | 15.7 | 0.0705 |
| LDPE Film | 0.0051 | 0.53 | 0 |
| Paper | 0.0044 | 0.457 | 0 |
| Total | 0.1999 | 20.032 | 0.0865 |
| Note 1 | 1 kg biogenic carbon is equivalent to 44/12 kg of CO2 | ||
LCA information
| EPD based on declared or functional unit | Declared unit |
|---|---|
| Declared unit and reference flow | Ultragum Mass: 1 kg |
| Conversion factor to mass | 1 |
| Are infrastructure or capital goods included in any upstream, core or downstream processes? | |
| Datasources used for this EPD | ecoinvent database (general) ecoinvent 3.11 database |
| LCA Software | SimaPro 10.3 |
| Version of the EN 15804 reference package | EF Reference Package 3.1 |
| Characterisation methods | EN 15804. VERSION: EF 3.1 |
| Technology description including background system | The products considered are liquid waterproofing compounds, fluid membranes, and protective coatings belonging to the Waterproofing Line. This multi-product EPD reflects a conservative worst-case scenario formulation among all included product variations. The products mainly consist of water (0.048 to 0.87 kg/kg), acrylic resins (0.00 to 0.633 kg/kg), Portland cement (0.00 to 0.37 kg/kg), quartz (0.00 to 0.30 kg/kg), epoxy resins (0.00 to 0.18 kg/kg), and recycled rubber (0.00 to 0.164 kg/kg). The manufacturing process is an industrial batch (discontinuous) blending operation. Raw materials are mechanically mixed and packaged into plastic buckets (PP), palletized on wooden pallets, and wrapped with protective polymer film (LDPE). Municipal water is used exclusively for equipment cleaning between production cycles and discharged as industrial wastewater, operating as a closed-loop system with no material scraps generated. Manufacturing operations are powered by an electricity mix composed of 19.10% self-produced solar energy and 80.90% from the national grid (Italian Residual Mix). The LCA background system relies on the Ecoinvent 3.11 database and SimaPro 10.3.0 software, covering a 'Cradle-to-gate' boundary (Modules A1–A3). |
| Scrap (recycled material) inputs contribution level | Less than 10% of the GWP-GHG results in modules A1-A3 come from scrap inputs |
Data quality assessment
| Description of data quality assessment and reference years | 2025 |
|---|
Data quality assessment
| Process name | Source type | Source | Reference year | Data category | Share of primary data, of GWP-GHG results for A1-A3 |
|---|---|---|---|---|---|
| Manufacturing of product | Collected data | EPD owner | 2025 | Primary data | 0% |
| Generation of electricity used in manufacturing of product | Collected data and Database | EPD owner and AIB Residual Mix | 2025 | Primary data | 8.5% |
| Input Raw materials | Collected data | EPD Owner Ecoinvent 3.11 | 2025 | Primary data, Secondary Data | 0% |
| Other processes | Databases | Ecoinvent 3.11 | 2025 | Secondary Data | 0% |
| Total share of primary data, of GWP-GHG results for A1-A3 | 8.5% | ||||
| The share of primary data is calculated based on GWP-GHG results. It is a simplified indicator for data quality that supports the use of more primary data to increase the representativeness of and comparability between EPDs. Note that the indicator does not capture all relevant aspects of data quality and is not comparable across product categories. | |||||
Electricity data
| Electricity used in the manufacturing process in A3 (A5 for services) | ||
|---|---|---|
| Type of electricity mix | Specific electricity mix as generated, or purchased from an electricity supplier, demonstrated by a contractual instrument | |
| Energy sources | Hydro | 1.21% |
| Wind | 0.39% | |
| Solar | 7.14% | |
| Biomass | 0% | |
| Geothermal | 0% | |
| Waste | 0% | |
| Nuclear | 4.73% | |
| Natural gas | 44.69% | |
| Coal | 0.09% | |
| Oil | 6.6% | |
| Peat | 0% | |
| Other | 0% | |
| GWP-GHG intensity (kg CO2 eq./kWh) | 2.76 kg CO2 eq./kWh | |
System boundary
| Description of the system boundary | d) Cradle to gate (A1-A3). |
|---|---|
| Excluded modules | No, there is no excluded module, or there are no excluded modules |
Declared modules
| Product stage | Construction process stage | Use stage | End of life stage | Beyond product life cycle | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Raw material supply | Transport | Manufacturing | Transport to site | Construction installation | Use | Maintenance | Repair | Replacement | Refurbishment | Operational energy use | Operational water use | De-construction demolition | Transport | Waste processing | Disposal | Reuse-Recovery-Recycling-potential | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Module | A1 | A2 | A3 | A4 | A5 | B1 | B2 | B3 | B4 | B5 | B6 | B7 | C1 | C2 | C3 | C4 | D | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Modules declared | X | X | X | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Geography | Global | Global | Italy | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Share of specific data | 8.5% | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Variation - products | 83.71% | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Variation - sites | 0% | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Disclaimer | The share of specific/primary data and both variations (products and sites) refer to GWP-GHG results only. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Process flow diagram(s) related images
Default scenario
| Name of the default scenario | Cradle-to-Gate |
|---|---|
| Description of the default scenario | The system boundary of this EPD follows a 'Cradle-to-gate' approach, covering exclusively the product stage (Modules A1-A3). Construction process stage (A4-A5), Use stage (B1-B7), End-of-life stage (C1-C4), and Benefits and loads beyond the system boundary (Module D) are omitted (Not Declared). |
Environmental performance
The estimated impact results are only relative statements, which do not indicate the endpoints of the impact categories, exceeding threshold values, safety margins and/or risks.
Mandatory environmental performance indicators according to EN 15804
| Impact category | Indicator | Unit | A1-A3 | A4 | A5 | B1 | B2 | B3 | B4 | B5 | B6 | B7 | C1 | C2 | C3 | C4 | D |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Climate change - total | GWP-total | kg CO2 eq. | 3.08E+0 | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND |
| Climate change - fossil | GWP-fossil | kg CO2 eq. | 2.94E+0 | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND |
| Climate change - biogenic | GWP-biogenic | kg CO2 eq. | 4.46E-5 | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND |
| Climate change - land use and land-use change | GWP-luluc | kg CO2 eq. | 1.40E-1 | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND |
| Ozone depletion | ODP | kg CFC-11 eq. | 5.81E-5 | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND |
| Acidification | AP | mol H+ eq. | 1.19E-2 | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND |
| Eutrophication aquatic freshwater | EP-freshwater | kg P eq. | 7.30E-4 | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND |
| Eutrophication aquatic marine | EP-marine | kg N eq. | 4.07E-3 | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND |
| Eutrophication terrestrial | EP-terrestrial | mol N eq. | 2.65E-2 | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND |
| Photochemical ozone formation | POCP | kg NMVOC eq. | 1.08E-2 | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND |
| Depletion of abiotic resources - minerals and metals | ADP-minerals&metals1 | kg Sb eq. | 1.49E-5 | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND |
| Depletion of abiotic resources - fossil fuels | ADP-fossil1 | MJ, net calorific value | 5.28E+1 | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND |
| Water use | WDP1 | m3 world eq. deprived | 5.70E-1 | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND |
| Acronyms | GWP-fossil = Global Warming Potential fossil fuels; GWP-biogenic = Global Warming Potential biogenic; GWP-luluc = Global Warming Potential land use and land use change; ODP = Depletion potential of the stratospheric ozone layer; AP = Acidification potential, Accumulated Exceedance; EP-freshwater = Eutrophication potential, fraction of nutrients reaching freshwater end compartment; EP-marine = Eutrophication potential, fraction of nutrients reaching marine end compartment; EP-terrestrial = Eutrophication potential, Accumulated Exceedance; POCP = Formation potential of tropospheric ozone; ADP-minerals&metals = Abiotic depletion potential for non-fossil resources; ADP-fossil = Abiotic depletion for fossil resources potential; WDP = Water (user) deprivation potential, deprivation-weighted water consumption | ||||||||||||||||
| Disclaimer 1 | The results of this environmental impact indicator shall be used with care as the uncertainties of these results are high or as there is limited experience with the indicator | ||||||||||||||||
Additional mandatory environmental performance indicators
| Impact category | Indicator | Unit | A1-A3 | A4 | A5 | B1 | B2 | B3 | B4 | B5 | B6 | B7 | C1 | C2 | C3 | C4 | D |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Climate change - GWP-GHG | GWP-GHG1 | kg CO2 eq. | 2.76E+0 | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND |
| Acronyms | GWP-GHG = Global warming potential greenhouse gas. | ||||||||||||||||
| Disclaimer 1 | The GWP-GHG indicator is termed GWP-IOBC/GHG in the ILCD+EPD+ data format. The indicator accounts for all greenhouse gases except biogenic carbon dioxide uptake and emissions and biogenic carbon stored in the product. As such, the indicator is identical to GWP-total except that the CF for biogenic CO2 is set to zero. | ||||||||||||||||
Additional voluntary environmental performance indicators according to EN 15804
| Impact category | Indicator | Unit | A1-A3 | A4 | A5 | B1 | B2 | B3 | B4 | B5 | B6 | B7 | C1 | C2 | C3 | C4 | D |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Particulate matter emissions | PM | Disease incidence | 2.25E-7 | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND |
| Ionizing radiation - human health | IRP1 | kBq U235 eq. | 1.50E-1 | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND |
| Eco-toxicity - freshwater | ETP-fw2 | CTUe | 7.52E+1 | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND |
| Human toxicity - cancer effects | HTP-c2 | CTUh | 2.74E-9 | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND |
| Human toxicity - non-cancer effects | HTP-nc2 | CTUh | 1.23E-7 | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND |
| Land-use related impacts/soil quality | SQP2 | Dimensionless | 1.67E+1 | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND |
| Acronyms | PM = Potential incidence of disease due to particulate matter emissions; IRP = Potential human exposure efficiency relative to U235; ETP-fw = Potential comparative toxic unit for ecosystems; HTP-c = Potential comparative toxic unit for humans; HTP-nc = Potential comparative toxic unit for humans; SQP = Potential soil quality index. | ||||||||||||||||
| Disclaimer 1 | This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator. | ||||||||||||||||
| Disclaimer 2 | The results of this environmental impact indicator shall be used with care as the uncertainties of these results are high or as there is limited experience with the indicator. | ||||||||||||||||
Resource use indicators according to EN 15804
| Indicator | Unit | A1-A3 | A4 | A5 | B1 | B2 | B3 | B4 | B5 | B6 | B7 | C1 | C2 | C3 | C4 | D |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PERE | MJ, net calorific value | 1.03E+1 | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND |
| PERM | MJ, net calorific value | 0.00E+0 | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND |
| PERT | MJ, net calorific value | 1.03E+1 | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND |
| PENRE | MJ, net calorific value | 5.04E+1 | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND |
| PENRM | MJ, net calorific value | 4.45E+0 | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND |
| PENRT | MJ, net calorific value | 5.50E+1 | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND |
| SM | kg | 0.00E+0 | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND |
| RSF | MJ, net calorific value | 0.00E+0 | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND |
| NRSF | MJ, net calorific value | 1.60E-1 | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND |
| FW | m3 | 5.50E-1 | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND |
| Acronyms | PERE = Use of renewable primary energy excluding renewable primary energy resources used as raw materials; PERM = Use of renewable primary energy resources used as raw materials; PERT = Total use of renewable primary energy resources; PENRE = Use of non-renewable primary energy excluding non-renewable primary energy resources used as raw materials; PENRM = Use of non-renewable primary energy resources used as raw materials; PENRT = Total use of non-renewable primary energy re-sources; SM = Use of secondary material; RSF = Use of renewable secondary fuels; NRSF = Use of non-renewable secondary fuels; FW = Use of net fresh water. | |||||||||||||||
Waste indicators according to EN 15804
| Indicator | Unit | A1-A3 | A4 | A5 | B1 | B2 | B3 | B4 | B5 | B6 | B7 | C1 | C2 | C3 | C4 | D |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HWD | kg | 1.08E-4 | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND |
| NHWD | kg | 1.92E+0 | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND |
| RWD | kg | 3.76E-5 | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND |
| Acronyms | HWD = Hazardous waste disposed; NHWD = Non-hazardous waste disposed; RWD = Radioactive waste disposed. | |||||||||||||||
Output flow indicators according to EN 15804
| Indicator | Unit | A1-A3 | A4 | A5 | B1 | B2 | B3 | B4 | B5 | B6 | B7 | C1 | C2 | C3 | C4 | D |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| CRU | kg | 0.00E+0 | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND |
| MFR | kg | 0.00E+0 | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND |
| MER | kg | 0.00E+0 | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND |
| EEE | MJ, net calorific value | 0.00E+0 | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND |
| EET | MJ, net calorific value | 0.00E+0 | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND | ND |
| Acronyms | CRU = Components for re-use; MFR = Materials for recycling; MER = Materials for energy recovery; EEE = Exported electrical energy; EET = Exported thermal energy. | |||||||||||||||
Abbreviations
Not Applicable
References
[1]. General Programme Instructions For The International Epd System - Version 5.0.1 2025-02-27;
[2]. Product Category Rules (PCR) - Construction Products PCR 2019:14 - Version 2.0.1;
[3]. ISO 14025:2010 - Environmental labels and declarations - Type III environmental declarations – Principles and procedures;
[4]. ISO 14040:2021 - Environmental Management – Life cycle assessment – Principles and framework;
[5]. ISO 14044:2021 - Environmental Management – Life cycle assessment – Requirements and guidelines;
[6]. ISO 15804:2021 - Sustainability of construction works – Environmental product declarations - Core rules for the product category of construction products;
[7]. ISO 15942:2021 - Sustainability of construction works — Environmental product declarations — Communication format business-to-business;
[8]. ISO 14020:2023 - Environmental labels and declarations — General principles;
[9]. Sito web: https://www.enel.it/content/dam/enel-it/documenti-supporto/mercatolibero-luce/Tabella%20Mix%20Energetico%20Enel%20Energia.pdf
[10]. L. Dalhgren, H. Stripple, “A comparative Study of Various Concept for Shopping Bags and Cements Sacks”. Study commissioned by Billerud Korsnäs AB. IVL Swedish Environmental Research Institute 2016. Report Number: U5732;
[11]. Association of Issuing Bodies, “European Residual Mixes Results of the calculation of Residual Mixes for the calendar year 2023”. Version 1.0, 2024-05-30;
[12]. P. Guo, W. Meng, J. Du, L. Stevenson, B. Han, Y. Bao, “Lightweight ultra-high-performance concrete (UHPC) with expanded glass aggregate: Development, characterization, and life-cycle assessment”. Construction and Building Materials 371 (2023);
[13]. E.Battiston, F.Carollo, G.Tameni, E. Bernardo, A.Mazzi, “Life Cycle Assessment of Industrial Glass Cullet Recycling Process Based on Alkaline Activation”. Ceramics2025;8,09;
[14]. G. Manthos, D.Zagklis, C.Georgopoulos, C.Zafiri, M.Kornaros, “Life Cycle Assessment of Waste Glass Geopolymerization for the Production of Sustainable Construction Materials” Processes 2025, 13, 331;
[15]. CONAI, “Relazione Generale Consuntiva 2024”. (2025);
[16]. ISPRA, “Rapporto Rifiuti Speciali” – Edizione 2025;
[17]. R.N. Pereira, I. Malico, P. Mesquita, A.M.O. Sousa, A.C Goncalves, “Energy use of cork residues in the Portuguese cork industry”. Conference Paper · October 2017.
Version history
Version 001, 2026-06-18
- Original version of the EPD