EPD-IES-0022366:002

Industriparkett Design 2.0

Industrial parquet Design 2.0, from Almedalsgolv, is a unique industrial parquet in solid wood. Design 2.0 is delivered with either a sanded or brushed surface and is available in a variety of surface treatments. This solid wood floor is delivered in ready-made elements with grooves and tongues all around, fully ground and hardwax oiled at the factory. The following 15 variants of the product have been examined: oak brushed + natural oil smoked oak brushed + natural oil ash brushed + natural oil oak sanded smoked oak sanded ash sanded oak sanded + natural oil smoked oak sanded + natural oil ash sanded + natural oil oak sanded + pigmented oil smoked oak sanded + pigmented oil ash sanded + pigmented oil oak brushed + pigmented oil smoked oak brushed + pigmented oil ash brushed + pigmented oil.

General information

EPD Owner	Almedals Trägolvsaktiebolag
Registration number	EPD-IES-0022366:002
PCR	2019:14 Construction products (EN 15804+A2) 1.3.4
c-PCR	2019:14-c-PCR-006 Being updated - Wood and wood-based products for use in construction (EN 16485) 1.0.0
Status	Valid
Publication date	2025-06-02
Valid until	2030-06-01
EN 15804 compliant	Yes
Geographical scope	Europe

Product images

Programme information

Programme	International EPD System
Address	EPD International AB Box 210 60 SE-100 31 Stockholm Sweden
Website	www.environdec.com
E-mail	support@environdec.com

Product category rules

CEN standard EN 15804 serves as the Core Product Category Rules (PCR)
Product Category Rules (PCR)	2019:14 Construction products (EN 15804+A2) 1.3.4
PCR review was conducted by	The Technical Committee of the International EPD System. See www.environdec.com for a list of members. Review chair: Claudia A. Peña, University of Concepción, Chile. The review panel may be contacted via the Secretariat www.environdec.com/support.
Complementary Product Category Rules (c-PCR)	2019:14-c-PCR-006 Being updated - Wood and wood-based products for use in construction (EN 16485) 1.0.0 Version: 1.0.0
c-PCR review was conducted by	The Technical Committee of the International EPD System

Verification

LCA accountability	Pietro Bartocci, pietro.bartocci@ri.se, Almedals Trägolvsaktiebolag
Independent third-party verification of the declaration and data, according to ISO 14025:2006, via	EPD verification through an individual EPD verification EPD verification through EPD Process Certification* EPD verification through a pre-verified LCA/EPD tool
Third-party verifier	Jan Weinzettel (Jan Weinzettel)
Approved by	International EPD System
Procedure for follow-up of data during EPD validity involves third party verifier	Yes No
*EPD Process Certification involves an accredited certification body certifying and periodically auditing the EPD process and conducting external and independent verification of EPDs that are regularly published. More information can be found in the General Programme Instructions on www.envrondec.com.

Ownership and limitation on use of EPD

Limitations

EPDs within the same product category but registered in different EPD programmes may not be comparable. For two EPDs to be comparable, they shall be based on the same PCR (including the same version number up to the first two digits) or be based on fully-aligned PCRs or versions of PCRs; cover products with identical functions, technical performances and use (e.g. identical declared/functional units); have equivalent system boundaries and descriptions of data; apply equivalent data quality requirements, methods of data collection, and allocation methods; apply identical cut-off rules and impact assessment methods (including the same version of characterisation factors); have equivalent content declarations; and be valid at the time of comparison.

Ownership

The EPD Owner has the sole ownership, liability, and responsibility for the EPD.

Information about EPD Owner

EPD Owner	Almedals Trägolvsaktiebolag
Contact person name	Jessica Poggensee
Contact person e-mail	Jessica@almedalsgolv.se
Organisation address	Sweden Kungsbacka 434 39 Arendalsvägen 33B

Description of the organisation of the EPD Owner

Almedals Trägolvsaktiebolag (Almedalsgolv) is a manufacturer of solid wood floorings and interiors.

Organisation logo

Product information

Product name	Industriparkett Design 2.0
Product identification	DIN EN 13629
Product description	Industrial parquet Design 2.0, from Almedalsgolv, is a unique industrial parquet in solid wood. Design 2.0 is delivered with either a sanded or brushed surface and is available in a variety of surface treatments. This solid wood floor is delivered in ready-made elements with grooves and tongues all around, fully ground and hardwax oiled at the factory. The following 15 variants of the product have been examined: oak brushed + natural oil smoked oak brushed + natural oil ash brushed + natural oil oak sanded smoked oak sanded ash sanded oak sanded + natural oil smoked oak sanded + natural oil ash sanded + natural oil oak sanded + pigmented oil smoked oak sanded + pigmented oil ash sanded + pigmented oil oak brushed + pigmented oil smoked oak brushed + pigmented oil ash brushed + pigmented oil.
Product information from external sources	www.almedalsgolv.se
Technical purpose of product	Flooring
Manufacturing or service provision description	Production process involves: planing, grooving, sanding, cutting. Surface treatment with hard wax oil and packaging. This is because the wood arrives already dried at the company.
Material properties	Thickness: 9 m Grammage: 6.08 kg/m² Volumetric mass density: 750 kg/m³ Area density: 6.08 kg/m²
Production site	almedalsgolv.se Sweden Kungsbacka 434 39 Arendalsvägen 33B
UN CPC code	3121. Wood, continuously shaped along any of its edges or faces (including strips and friezes for parquet flooring, not assembled, and beadings and mouldings)
Geographical scope	Europe
Actual or technical lifespan	> 50 years year(s)

Content declaration

Content declaration of multiple products	We choose to insert the worst case produkt: smoked oak, sanded + pigmentet oil
Hazardous and toxic substances	The product does not contain any substances from the SVHC candidate list in concentrations exceeding 0.1% of its weight.

Product content
Content name	Weight, kg	Post-consumer recycled material, weight-% of product	Biogenic material, weight-% of product	Biogenic material¹, kg C/declared unit
Wood	5	0	82.2	2.47
Glue	0.9	0	0	0
Polyester	0.15	0	0	0
Oil	0.03	0	0.5	0.02
Total	6.08	0	82.70	2.49
Note 1	1 kg biogenic carbon is equivalent to 44/12 kg of CO₂

Packaging materials
Material name	Weight, kg	Weight-% (versus the product)	Biogenic material¹, kg C/declared unit
Woodpalette	0.18	2.81	0.08
LDPE	0.02	0.24	0
Cardboard	0.01	0.07	0
Total	0.21	3.12	0.08
Note 1	1 kg biogenic carbon is equivalent to 44/12 kg of CO₂

LCA information

EPD based on declared or functional unit	Declared unit
Declared unit and reference flow	1 kvm of hardwood flooring including surface treatment Area: 1 m²
Conversion factor to mass	6.08
Are infrastructure or capital goods included in any upstream, core or downstream processes?	Yes No
Datasources used for this EPD	ecoinvent database (general) ecoinvent 3.9.1 database
LCA Software	SimaPro SimaPro 9.6
Version of the EN 15804 reference package	EF Reference Package 3.1
Technology description including background system	Industrial parquet Design 2.0 is a unique industrial parquet in solid wood. Design 2.0 is delivered with either a sanded or brushed surface and is available in a variety of surface treatments. This solid wood floor is delivered in ready-made elements with grooves and tongues all around, fully ground and hardwax oiled at the factory.
Scrap (recycled material) inputs contribution level	Less than 10% of the GWP-GHG results in modules A1-A3 come from scrap inputs

Data quality assessment and reference years

Description of data quality assessment and reference years	2024

Data quality assessment and reference years
Process name	Source type	Source	Reference year	Data category	Share of primary data, of GWP-GHG results for A1-A3
Wood production, drying and fuming	EPD data, plus questionnaire data	EPD owner	Dec 31 202 - Dec 30 202	Generic data	0%
Glue	EPD data	EPD owner	Dec 31 202 - Dec 30 202	Primary	31%
Polyester	Ecoinvent 3.9.1	EPD owner	Dec 31 202 - Dec 30 202	Generic data
Packaging	Ecoinvent 3.9.1	EPD owner	Dec 31 202 - Dec 30 202	Generic data
Electricity	Ecoinvent 3.9.1	EPD owner	Dec 31 202 - Dec 30 202	Primary	2%
Transport	Ecoinvent 3.9.1	EPD owner	Dec 31 202 - Dec 31 202	Primary	5%
Total share of primary data, of GWP-GHG results for A1-A3					38%
The share of primary data is calculated based on GWP-GHG results. It is a simplified indicator for data quality that do not capture all relevant aspects of data quality. The indicator is not comparable across product categories.

Electricity data

Electricity used in the manufacturing process in A3
Type of electricity mix	Specific electricity mix as generated, or purchased from an electricity supplier, demonstrated by a contractual instrument
Energy sources	Hydro	59%
	Wind	0%
	Solar	41%
	Biomass	0%
	Geothermal	0%
	Waste	0%
	Nuclear	0%
	Natural gas	0%
	Coal	0%
	Oil	0%
	Peat	0%
	Other	0%
GWP-GHG intensity (kg CO₂ eq./kWh)	0.04 kg CO₂ eq./kWh

System boundary

Description of the system boundary	b) Cradle to gate with options, modules C1-C4, module D and with optional modules (A1-A3 + C + D and additional modules).
Excluded modules	No, there is no excluded module, or there are no excluded modules

Declared modules

	Product stage			Construction process stage		Use stage							End of life stage				Beyond product life cycle
	Raw material supply	Transport	Manufacturing	Transport to site	Construction installation	Use	Maintenance	Repair	Replacement	Refurbishment	Operational energy use	Operational water use	De-construction demolition	Transport	Waste processing	Disposal	Reuse-Recovery-Recycling-potential
Module	A1	A2	A3	A4	A5	B1	B2	B3	B4	B5	B6	B7	C1	C2	C3	C4	D
Modules declared	X	X	X	X	X	ND	X	ND	ND	ND	ND	ND	X	X	X	X	X
Geography	Germany	Germany	Germany	Europe	Europe	N/A	Europe	N/A	N/A	N/A	N/A	N/A	Europe	Europe	Europe	Europe	Europe
Share of specific data	38%			-	-	-	-	-	-	-	-	-	-	-	-	-	-
Variation - products	80%			-	-	-	-	-	-	-	-	-	-	-	-	-	-
Variation - sites	0%			-	-	-	-	-	-	-	-	-	-	-	-	-	-

Process flow diagram(s) related images

Default scenario

Name of the default scenario	smoked oak sanded + pigmented oil
Description of the default scenario	Smoked oak wood which is dried and then sanded and coated with pigmented oil. The estimated impact results are only relative statements, which do not indicate the endpoints of the impact categories, exceeding threshold values, safety margins and/or risks.

Module A4: Transport to the building site

Explanatory name of the default scenario in module A4	Distribution to Kiruna
Brief description of the default scenario in module A4	Distribution to the most far away place from the production site
Description of the default scenario in module A4	Distribution to the most far away place from the production site

Module A4 information	Value	Unit
Distance	1580	km
Capacity utilization (including empty returns)	50	%
Bulk density of transported products	650	kg/m³
Volume capacity utilization factor (factor: =1 or <1 or ≥1 for compressed or nested packaged products)	1	N/A

Module A5: Installation in the building

Explanatory name of the default scenario in module A5	Manual installation
Brief description of the default scenario in module A5	Manual installation
Description of the default scenario in module A5	Manual installation, packaging is disposed of

Module A5 information	Value	Unit
Net fresh water consumption during installation	0	m³
plastic to recycle	0.0071	kg
polypropylene to recycle	0.0126	kg
steel and iron to recycle	0.0003	kg
steel to incineration	0.0000685	kg
paperboard to incineration	0.0036	kg
paper to recycle	0.0009	kg

Module B2: Maintenance

Explanatory name of the default scenario in module B2	maintenance process
Brief description of the default scenario in module B2	The maintenance process is described as in the EPD on solid wood flooring
Description of the default scenario in module B2	The maintenance process is described as in the EPD on solid wood flooring

Module B2 information	Value	Unit
Maintenance process	Cleaning and oiling
Maintenance cycle	5200	Dimensionless
Net fresh water consumption during maintenance	0.24	m³
Electricity consumption	72.5

Module C: End-of-life

Explanatory name of the default scenario in module C	Deconstruction and EoL
Brief description of the default scenario in module C	Deconstruction and demolition, transport to diposal and End of Life
Description of the default scenario in module C	Deconstruction and demolition, transport to diposal and End of Life, mainly by incineration.

Module C information	Value	Unit
Manual deconstruction	1	N/A
Incineration	5	kg

Module D: Beyond product life cycle

Explanatory name of the default scenario in module D	Beyond product life
Brief description of the default scenario in module D	Beyond product life cycle, her it is considered the avoided heat and electricity
Description of the default scenario in module D	Beyond product life cycle. Avoided energy products from incineration are estimated.

Module D information	Value	Unit
Replaced heat from wood	15.88	MJ, net calorific value
Replaced electricity from grid	32.1	MJ, net calorific value

Environmental performance

The estimated impact results are only relative statements, which do not indicate the endpoints of the impact categories, exceeding threshold values, safety margins and/or risks.

Mandatory environmental performance indicators according to EN 15804

Impact category	Indicator	Unit	A1-A3	A4	A5	B1	B2	B3	B4	B5	B6	B7	C1	C2	C3	C4	D	Variation²
Climate change - total	GWP-total	kg CO₂ eq.	-1.21E+0	1.02E+0	2.24E-2	ND	1.67E+0	ND	ND	ND	ND	ND	0.00E+0	2.14E-2	7.38E+0	0.00E+0	-2.35E+0	-79.00%
Climate change - fossil	GWP-fossil	kg CO₂ eq.	6.08E+0	1.02E+0	1.67E-2	ND	1.56E+0	ND	ND	ND	ND	ND	0.00E+0	2.14E-2	6.45E-2	0.00E+0	-2.13E+0	-70.00%
Climate change - biogenic	GWP-biogenic	kg CO₂ eq.	-7.32E+0	2.66E-4	5.66E-3	ND	0.00E+0	ND	ND	ND	ND	ND	0.00E+0	5.56E-6	7.32E+0	0.00E+0	-2.16E-1	0.00%
Climate change - land use and land-use change	GWP-luluc	kg CO₂ eq.	1.98E-2	5.52E-5	4.20E-7	ND	1.15E-1	ND	ND	ND	ND	ND	0.00E+0	1.15E-6	1.33E-5	0.00E+0	-4.29E-3	-4.00%
Ozone depletion	ODP	kg CFC-11 eq.	2.28E-7	2.28E-7	1.19E-10	ND	1.30E-7	ND	ND	ND	ND	ND	0.00E+0	4.77E-9	1.53E-9	0.00E+0	-3.20E-8	-17.00%
Acidification	AP	mol H⁺ eq.	1.99E-2	6.64E-3	5.70E-6	ND	1.13E-2	ND	ND	ND	ND	ND	0.00E+0	1.39E-4	7.73E-4	0.00E+0	-7.53E-3	-16.00%
Eutrophication aquatic freshwater	EP-freshwater	kg P eq.	6.21E-4	1.04E-5	1.17E-7	ND	5.66E-4	ND	ND	ND	ND	ND	0.00E+0	2.18E-7	2.40E-5	0.00E+0	-3.00E-3	-9.00%
Eutrophication aquatic marine	EP-marine	kg N eq.	3.41E-3	2.83E-3	2.89E-6	ND	3.33E-3	ND	ND	ND	ND	ND	0.00E+0	5.91E-5	4.20E-4	0.00E+0	-2.35E-3	-19.00%
Eutrophication terrestrial	EP-terrestrial	mol N eq.	3.48E-2	3.10E-2	2.66E-5	ND	2.43E-2	ND	ND	ND	ND	ND	0.00E+0	6.48E-4	4.02E-3	0.00E+0	-2.55E-2	-21.00%
Photochemical ozone formation	POCP	kg NMVOC eq.	1.84E-2	7.73E-3	6.95E-6	ND	6.90E-3	ND	ND	ND	ND	ND	0.00E+0	1.62E-4	1.02E-3	0.00E+0	-5.53E-3	-26.00%
Depletion of abiotic resources - minerals and metals	ADP-minerals&metals¹	kg Sb eq.	1.81E-5	1.77E-7	2.13E-9	ND	1.88E-5	ND	ND	ND	ND	ND	0.00E+0	3.70E-9	1.02E-7	0.00E+0	-3.66E-6	-39.00%
Depletion of abiotic resources - fossil fuels	ADP-fossil¹	MJ, net calorific value	8.89E+1	1.42E+1	4.02E-3	ND	2.80E+1	ND	ND	ND	ND	ND	0.00E+0	2.96E-1	5.18E-1	0.00E+0	-3.19E+1	-62.00%
Water use	WDP¹	m³ world eq. deprived	3.04E+0	6.53E-3	2.19E-4	ND	1.68E+0	ND	ND	ND	ND	ND	0.00E+0	1.37E-4	1.03E-2	0.00E+0	-8.32E-2	-51.00%
Acronyms	GWP-fossil = Global Warming Potential fossil fuels; GWP-biogenic = Global Warming Potential biogenic; GWP-luluc = Global Warming Potential land use and land use change; ODP = Depletion potential of the stratospheric ozone layer; AP = Acidification potential, Accumulated Exceedance; EP-freshwater = Eutrophication potential, fraction of nutrients reaching freshwater end compartment; EP-marine = Eutrophication potential, fraction of nutrients reaching marine end compartment; EP-terrestrial = Eutrophication potential, Accumulated Exceedance; POCP = Formation potential of tropospheric ozone; ADP-minerals&metals = Abiotic depletion potential for non-fossil resources; ADP-fossil = Abiotic depletion for fossil resources potential; WDP = Water (user) deprivation potential, deprivation-weighted water consumption
General disclaimer	The results of the end-of-life stage (modules C1-C4) should be considered when using the results of the product stage (modules A1-A3/A1-A5 for services).
Disclaimer 1	The results of this environmental impact indicator shall be used with care as the uncertainties of these results are high or as there is limited experience with the indicator
Disclaimer 2	The maximum variation in results between the included products.

Additional mandatory environmental performance indicators

Impact category	Indicator	Unit	A1-A3	A4	A5	B1	B2	B3	B4	B5	B6	B7	C1	C2	C3	C4	D	Variation²
Climate change - GWP-GHG	GWP-GHG¹	kg CO₂ eq.	6.10E+0	1.02E+0	1.67E-2	ND	1.67E+0	ND	ND	ND	ND	ND	0.00E+0	2.14E-2	6.45E-2	0.00E+0	-2.13E+0	80.00%
Acronyms	GWP-GHG = Global warming potential greenhouse gas.
General disclaimer	The results of the end-of-life stage (modules C1-C4) should be considered when using the results of the product stage (modules A1-A3/A1-A5 for services).
Disclaimer 1	The GWP-GHG indicator is termed GWP-IOBC/GHG in the ILCD+EPD+ data format. The indicator accounts for all greenhouse gases except biogenic carbon dioxide uptake and emissions and biogenic carbon stored in the product. As such, the indicator is identical to GWP-total except that the CF for biogenic CO₂ is set to zero.
Disclaimer 2	The maximum variation in results between the included products.

Resource use indicators according to EN 15804

Indicator	Unit	A1-A3	A4	A5	B1	B2	B3	B4	B5	B6	B7	C1	C2	C3	C4	D	Variation¹
PERE	MJ, net calorific value	1.48E+1	3.64E-2	3.16E+0	ND	1.01E+1	ND	ND	ND	ND	ND	0.00E+0	7.60E-4	8.75E+1	0.00E+0	-2.14E+1	0.00%
PERM	MJ, net calorific value	9.07E+1	0.00E+0	-3.16E+0	ND	0.00E+0	ND	ND	ND	ND	ND	0.00E+0	0.00E+0	-8.75E+1	0.00E+0	0.00E+0	0.00%
PERT	MJ, net calorific value	1.05E+2	3.64E-2	3.85E-4	ND	1.01E+1	ND	ND	ND	ND	ND	0.00E+0	7.60E-4	1.83E-2	0.00E+0	-2.14E+1	0.00%
PENRE	MJ, net calorific value	6.00E+1	1.42E+1	8.37E-1	ND	2.82E+1	ND	ND	ND	ND	ND	0.00E+0	2.96E-1	2.86E+1	0.00E+0	-3.19E+1	0.00%
PENRM	MJ, net calorific value	2.89E+1	0.00E+0	-8.33E-1	ND	0.00E+0	ND	ND	ND	ND	ND	0.00E+0	0.00E+0	-2.81E+1	0.00E+0	0.00E+0	0.00%
PENRT	MJ, net calorific value	8.89E+1	1.42E+1	4.02E-3	ND	2.82E+1	ND	ND	ND	ND	ND	0.00E+0	2.96E-1	5.18E-1	0.00E+0	-3.19E+1	0.00%
SM	kg	0.00E+0	0.00E+0	0.00E+0	ND	0.00E+0	ND	ND	ND	ND	ND	0.00E+0	0.00E+0	0.00E+0	0.00E+0	1.89E-1	0.00%
RSF	MJ, net calorific value	0.00E+0	0.00E+0	0.00E+0	ND	0.00E+0	ND	ND	ND	ND	ND	0.00E+0	0.00E+0	0.00E+0	0.00E+0	0.00E+0	0.00%
NRSF	MJ, net calorific value	0.00E+0	0.00E+0	0.00E+0	ND	0.00E+0	ND	ND	ND	ND	ND	0.00E+0	0.00E+0	0.00E+0	0.00E+0	0.00E+0	0.00%
FW	m³	6.32E-1	3.43E-4	1.03E-5	ND	5.39E-2	ND	ND	ND	ND	ND	0.00E+0	7.17E-6	1.02E-3	0.00E+0	-1.34E-2	0.00%
Acronyms	PERE = Use of renewable primary energy excluding renewable primary energy resources used as raw materials; PERM = Use of renewable primary energy resources used as raw materials; PERT = Total use of renewable primary energy resources; PENRE = Use of non-renewable primary energy excluding non-renewable primary energy resources used as raw materials; PENRM = Use of non-renewable primary energy resources used as raw materials; PENRT = Total use of non-renewable primary energy re-sources; SM = Use of secondary material; RSF = Use of renewable secondary fuels; NRSF = Use of non-renewable secondary fuels; FW = Use of net fresh water.
General disclaimer	The results of the end-of-life stage (modules C1-C4) should be considered when using the results of the product stage (modules A1-A3/A1-A5 for services).
Disclaimer 1	The maximum variation in results between the included products.

Waste indicators according to EN 15804

Indicator	Unit	A1-A3	A4	A5	B1	B2	B3	B4	B5	B6	B7	C1	C2	C3	C4	D	Variation¹
HWD	kg	3.55E-8	0.00E+0	0.00E+0	ND	0.00E+0	ND	ND	ND	ND	ND	0.00E+0	0.00E+0	0.00E+0	0.00E+0	0.00E+0	0.00%
NHWD	kg	1.34E-1	0.00E+0	0.00E+0	ND	0.00E+0	ND	ND	ND	ND	ND	0.00E+0	0.00E+0	0.00E+0	0.00E+0	0.00E+0	0.00%
RWD	kg	2.15E-4	0.00E+0	0.00E+0	ND	0.00E+0	ND	ND	ND	ND	ND	0.00E+0	0.00E+0	0.00E+0	0.00E+0	0.00E+0	0.00%
Acronyms	HWD = Hazardous waste disposed; NHWD = Non-hazardous waste disposed; RWD = Radioactive waste disposed.
General disclaimer	The results of the end-of-life stage (modules C1-C4) should be considered when using the results of the product stage (modules A1-A3/A1-A5 for services).
Disclaimer 1	The maximum variation in results between the included products.

Output flow indicators according to EN 15804

Indicator	Unit	A1-A3	A4	A5	B1	B2	B3	B4	B5	B6	B7	C1	C2	C3	C4	D	Variation¹
CRU	kg	0.00E+0	0.00E+0	0.00E+0	ND	0.00E+0	ND	ND	ND	ND	ND	0.00E+0	0.00E+0	0.00E+0	0.00E+0	0.00E+0	0.00%
MFR	kg	0.00E+0	0.00E+0	1.89E-1	ND	0.00E+0	ND	ND	ND	ND	ND	0.00E+0	0.00E+0	0.00E+0	0.00E+0	0.00E+0	0.00%
MER	kg	0.00E+0	0.00E+0	0.00E+0	ND	0.00E+0	ND	ND	ND	ND	ND	0.00E+0	0.00E+0	0.00E+0	0.00E+0	0.00E+0	0.00%
EEE	MJ, net calorific value	0.00E+0	0.00E+0	1.01E-1	ND	0.00E+0	ND	ND	ND	ND	ND	0.00E+0	0.00E+0	1.59E+1	0.00E+0	0.00E+0	0.00%
EET	MJ, net calorific value	0.00E+0	0.00E+0	2.05E-1	ND	0.00E+0	ND	ND	ND	ND	ND	0.00E+0	0.00E+0	3.22E+1	0.00E+0	0.00E+0	0.00%
Acronyms	CRU = Components for re-use; MFR = Materials for recycling; MER = Materials for energy recovery; EEE = Exported electrical energy; EET = Exported thermal energy.
General disclaimer	The results of the end-of-life stage (modules C1-C4) should be considered when using the results of the product stage (modules A1-A3/A1-A5 for services).
Disclaimer 1	The maximum variation in results between the included products.

References

EN 15804:2012+A2:2019 + AC:2021: Sustainability of construction works - Environmental product declarations - Core rules for the product category of construction products

General Program Instructions of the International EPD® System. Version 4.0.

ISO 14025:2006-07: Environmental labels and declarations - Type III environmental declarations - Principles and procedures

PCR 2019:14. Construction products. Version 1.3.4

Version history

003