NOVATOP SWP

NOVATOP multilayer boards are made from coniferous sawn timber dried to 8% (larch 12 %). Each layer of the board is made up of slats of solid growing timber. 3-layer board consists of two outer layers and one central layer with a perpendicular grain to the grain of the top layers. A 5-ply board has two parallel surface layers on each side and one centre layer with a perpendicular fibre path to the fibre path of the surface layers. The thickness of the layers can vary and determines the final thickness of the board. The centre layer slats are bonded longitudinally and lengthwise bonded either butt or may be continuous. The maximum thickness is 42 mm. The outer layers are made of continuous slats with a thickness of 6 or 9 mm and a width of 93 to 143 mm. There is always a single plate the same width of the surface slats and are facing the right side of the surface. Longitudinal joints of the slats in each layer are glued together. The adhesive used is waterproof and the bonding of the surface slats corresponds to AW 100 or D4 according to EN 204. The sanding quality corresponds to grit 100.