Firesafe FT Acrylic

FIRESAFE FT Acrylic is a heat-expanding, one component acrylic-based joint sealant. FIRESAFE FT Acrylic expands two times volumetrically when temperature reaches approximately 180 ℃.

FIRESAFE FT Acrylic is generally used for single installation penetrations with maximum opening ≤ ⌀ 15 mm between installation penetrations and construction. For openings ≥ 15 mm between installation and construction, or with multiple installation penetrations, use FIRESAFE FT Acrylic in combination with FIRESAFE FT Board or FIRESAFE GPG MORTAR.

FIRESAFE FT Acrylic sealant certifications:

• Ensure FIRESAFE FT Acrylic has been tested according to NS-EN 1366-3 (2009) and NS-EN 1366-4 (2009), EN 13501-1 and EN 13501-2.
• Certified according to ETA- 16/0094 - 16/0102.
• Fire resistance EI 30 to EI 240 with extensive applications for walls and floors
• Fire-classified walls according to EN 1363-1: Plasterboard or masonry / cast construction (density 600 - 650 kg/m3) ≥ 100 mm
• Fire-classified walls according to EN 1363-1: Floors or masonry / cast construction (density 600 - 650 kg/m3) ≥ 150 mm
• Approved as smoke sealant according to EN 1634-3

The product is produced in the Netherlands. FIRESAFE AS retails the product in Norway as tubes of 310 ml or foils up to 600 ml. This LCA is based on the 310 ml tube. The product falls in the UN CPC class 3511.