Log on to environdec


27, 2016

MoU between the International EPD® System and PEP ecopassport

MoU between the International EPD® System and PEP ecopassport

The International EPD® system is very pleased  to announce the signature of a Memorandum of Understanding with PEP ecopassport® to develop collaboration between both EPD programs.

The International EPD® System and PEP ecopassport® are both environmental product declaration program operators in Europe, interested in the promotion of type III Environmental Product Declaration in compliance with ISO 14025.

The collaboration between the two programs should allow, in the field of Electrical, Electronic and Heating/Ventilation/Air Conditioning-Refrigeration (HVAC-R) products aims at examining:

  • The recognition of existing Product Category Rules (PCRs) and possible future co-development,
  • The recognition of verification schemes,
  • The recognition of EPD from both programs,
  • The possibility to register EPDs in each Program Operator database,
  • The possibility to collaborate within standardization working groups and other scheme development initiatives.

PEP ecopassport website


16, 2016

Mutual recognition agreement between EPD Norge and the International EPD® System

Mutual recognition agreement between EPD Norge and the International EPD® System

EPD International AB and the the Norwegian EPD Foundation has signed an agreement of mutual recognition between EPDs developed in their respective EPD programmes.

This agreement will entitle companies with a verified EPD in either programme to additionally use the logo from the other programme, incorporating the EPD to their registry and website, based on the equivalence of the verification procedures between these program operators.

"We are very happy to have signed this mutual recognition agreement with the Norwegian EPD Foundation. The Norwegian programme was established already in 2002 and we have had a lot of contact through the years. As we already have a number of companies that already have registered EPDs in both programmes this agreement will be of benefit for them and other companies that are interested in dual registration," says Joakim Thornéus at the Secretariat of the International EPD® System.

For more information, please contact the Secretariat.


13, 2016

Case study: Bombardier

A new case study has been published, providing insights on how Bombardier uses EPD in communication and in ecodesign.

Do you have ideas for future EPD case studies? Please contact the Secretariat.


10, 2016

MAPEI finalise their EPD Process Certification

MAPEI S.p.A. has become the latest company to get an EPD Process Certification, meaning that their internal processes to produce EPDs have been quality assured by an external certification body. MAPEI is an Italian company manufacturing construction products such as adhesives, sealants and other chemical products for building industry, with 67 production plants and 79 subsidiaries all over the world, 18 R&D laboratories and 9000 employees. Most locations are ISO 9001 and ISO 14001 or EMAS-certified.

Mapei’s traditional care of product sustainability has been focused for the last two years on fighting against “green washing”, trying to measure and communicate in a more transparent way their performances in the environmental sustainability. A special corporate function has been created to assess the environmental impacts across the whole life cycle of products.

In 2013 Mapei joined the “Call for the Analysis of the Carbon Footprint during the Life Cycle of Consumer Goods”, promoted by the Italian Ministry of the Environment. This experience made MAPEI aware of the importance of LCA study, in order to measure and reduce the impacts of their products on the environment.

Nowadays the interest to sustainability is growing faster and faster, leading to several environmental assessment programs for green buildings such as LEED and BREEAM.

“A certified document such as EPD on our construction products is today a must for transparent communication to stakeholders.” says Mikaela Decio at MAPEI.  

“For 2 years in our HQ in Milan we got the software and the competences to make the LCA of our products by ourselves” says Roberto Leoni at MAPEI “now, with the EPD process certification we can verify and improve our environmental performances during the whole life cycle of our products. We think EPD is an important tool for avoiding the green-washing: it’s a measured, verified and certified report for communication to all stakeholders.”

The EPD Process Certification is one of the features of the International EPD® System to allow companies to make the process to create EPDs more efficient and enable the creation of EPDs at a large scale. More information is available in the link below.


3, 2016

Summer schedule at the Secretariat

Photo: Johan Hansson, Flickr (Licence: CC BY 2.0)

The Secretariat will be closed for about three weeks during the (northern hemisphere) summer period of 2016. For any questions the EPD System, EPDs, PCRs or EPD registrations, please use the following contacts:

Dates Main contact, all topics
July 2nd - July 8th joakim@environdec.com
July 9th - July 31st Secretariat closed
August 1st - August 12th kristian@environdec.com

If you have an EPD that is expected to be ready very close in time to this period, please contact the Secretariat in advance.


1, 2016

Scientific paper investigates the use of EPDs to achieve LEED® credits

An interesting scientific paper by M.D.C. Gelowitz and J.J. McArhur was recently presented at the International Conference on Sustainable Design, Engineering and Construction (ICSDEC 2016). The paper investigates a case of using EPDs in getting the two applicable LEED® credits for a new buliding in Canada.

The paper oulines both benefits of using EPDs and a few concerns of the three main stakeholder groups: Owner/client, Designer and Contractor. Both the Designer and Contractor indicated they would work with EPDs in the future on LEED® projects.

The paper is available as open access via http://www.sciencedirect.com/science/article/pii/S1877705816300182.

Full reference: M.D.C. Gelowitz and J.J. McArhur, 2016. Investigating the effect of environmental product declaration adoption in LEED® on the construction industry. Procedia Engineering 145, pp. 58-65. Available online at www.sciencedirect.com.


27, 2016

LCM 2017 - Call for abstracts now open

The International EPD® System will chair a session at the conference LCM 2017 which will take place in Luxembourg, September 3 - 6, 2017. The title of the session is "Using LCA and EPD in Public Procument within the construction sector". The session will include 6 shorter presentations providing different perspectives on using EPDs in public procurement within the construction sector. Abstract submission is now open and will close on December 15, 2016.

More information on the call for abstracts and on the conference can be found here.

LCM 2017


26, 2016

Declarations from companies in 28 countries now registered in the International EPD System

EPD World map

With the recent addition of an EPD from Glassolutions Saint-Gobain in Poland added to the EPD library, there are now registered EPDs from companies in 28 countries in the International EPD® System.

EPD registrations for most countries is handled by the International Secretariat. For the markets of Turkey and Australia/New Zealand and Mexico/Chile, the system has partnered with local organisations to establish of local environmental declaration programmes, based on and aligned with the International EPD® System.

All EPDs may be found by browsing by category or by searching by name, company name or key words in the EPD Search.

For more information, please contact the Secretariat at info@environdec.com.

Search or browse among all registered EPDs


9, 2016

PCR for Buses and coaches published


Product Category Rules (PCR) for declaring the life-cycle environmental impact of Public and private buses and coaches have now been published in the International EPD® System. This document is the first known PCR according to ISO 14025 for the product group, and enables any company in the industry to develop and register an EPD to be used for a wide range of applications, such as as one part of the environmental management system or in business-to-business communication.

The PCR was developed according to the PCR process described in the General Programme Instructions of the International EPD® System, based on ISO 14025. The process was led by Gorka Benito Alonso at IK Ingeniería as the PCR Moderator. During the development of the document, it has been subject to open consultation on www.environdec.com as well as a review by the Technical Committee as the appointed review panel.


18, 2016

How do you recognize a true EPD?


An EPD is a type III environmental declaration according to ISO 14025 or EN 15804. However, on the market there are other documents that could be mistaken for being type III environmental declarations, but rather should be seen as self-declarations or the results from LCA studies. Such documents are lacking some important characteristics that true EPDs have. Here are three important things to look for when reading a document claiming to be an EPD, with or without a reference to ISO 14025 or EN 15804:

1. Reference to an EPD programme

According to ISO 14025 the EPD shall refer to the EPD programme under which it has been registered. The EPD programme operator is responsible for making sure that it's documentation fulfills the requirements in the standards. The programme operator has many duties to fulfill, and is intended to ensure transparency and credibility in the declarations. As the programme operator shall maintain a public register over all registered EPDs it is also easy to check the validity of the EPD by visiting the website of the program operator or by contacting the operator.

2. Reference to product category rules (PCR)

The EPD shall also refer the PCR-document that has been used for the EPD development. The programme operator is responsible for that the PCR is developed according to the ISO standard. The PCR document ensures that the EPDs within the same product category are developed and presented in the same way and also gives information on the methods used in the life cycle assessment. The programme operator shall maintain a record over the PCR documents developed within the programme.

3. Information on the verification

The EPD shall have information on the verification process. Most EPD programmes requires a third party verification and the EPD shall contain information on the name of the verifier, which can either be a person or organisation. The EPD shall also give information on the validity date.


18, 2016

The International EPD® System launches new page for increased global PCR harmonization

Examples of PCRs

In recent years, new potential market applications related to EPD have led to an increased interest among various stakeholders in many countries to take part in the work related to the development of Product Category Rules (PCR), and many initiatives exist worldwide. The international standard ISO 14025 states that:

”Harmonization of general programme instructions and particularly product category rules (PCR) are encouraged between programmes to meet the principle of comparability. (…) programme operators are encouraged to work cooperatively to achieve harmonization of the programmes and to develop mutual recognition agreements”

Research papers such as Minkov et al. (2015) and Hunsager et al. (2014), as well as market best practices such as the Guidance for PCR development have also highlighted the importance of global harmonisation efforts in Product Category Rules.

Companies and associations from 27 countries have registered and published EPDs in the International EPD® System, and it also has a PCR database containing more that 100 product categories spanning construction, food, transportation, energy, goods and much more.

To build upon this and to contribute to the global efforts in the area of PCR in the spirit of ISO 14025, the International EPD® System is launching a new page on its website: Global PCR libraries and resources. This page is intended to work as a focal point for PCR-related information for the benefit of those interested in developing PCRs in International EPD® System and in other programmes.

"With its large library of PCRs and EPDs from different countries, it is natural for the International EPD® System to offer this additional service. We hope that stakeholders will find this useful, and that this may give a boost to global PCR harmonization efforts," says Kristian Jelse, responsible for PCR development and the PCR database.


29, 2016

Upcoming event: 5th International Seminar of the Ibero-American Network of LCA

Upcoming event: 5th International Seminar of the Ibero-American Network of LCA

Date: June 8-10, 2016.
Place: Viña del Mar, Chile.

During the last CILCA Congress held in Peru in June 2015, Chile was awarded with the realization of the next International  Life Cycle Seminar of the Ibero-American LC Network (RICV). RICV has two major international events, one of them is the renown  Life Cycle Congress (CILCA) and the other is the Seminar, alternating every other year.

The next RICV Seminar will be this year in June 8-10; it is organized by the Chilean LC Network together with RICV and UNEP-SETAC LC Initiative, and with the support of the Minitries of Environment and Foreing Affair of Chile, the  Center of Cleaner Production, and the International EPD System. The RICV Seminar will be held in conjunction with the First Chilean Congress on LCA.

Unlike the CILCA Congresses, which have a strong scientific approach and a level of demand that makes them more restrictive, the focus of the RICV Seminars  has a greater emphasis on technical and practical issues associated to the use of life cycle tools; that is, their applications and implementation in the industry, companies and public and private organizations. The works are selected by an expert committee, which accommodates both scientific  and technical presentations  from companies and public and private institutions, as well as from academic and research institutions.

As has happened in all previous seminars and events of RICV, we expect many participants from all around the world, but especially from Chile and Latin America.

All are very welcome!

More information: http://redacvchile.wix.com/lca-event


23, 2016

First EPDs for cosmetics

First EPDs for cosmetics
The Italian company Unifarco has registrered two EPDs for cosmetics. These EPDs are the first for this product group. The EPDs gives information on the environmental impact from two products in two product categories: "leave-on" cosmetic products and "rinse-off" cosmetic products.

The Italian company Unifarco has registrered two EPDs for cosmetic products. These EPDs are the first registered for this product category. The EPDs gives information on the environmental impact from four products in two different product lines: "leave-on" cosmetic products and "rinse-off" cosmetic products.

EPD "Leave on" cosmetic products

EPD "Rinse-off" cosmetic products


11, 2016

Call for PCR Moderators to update expired PCRs: Beer, Washing machines, Passenger vehicles, etc.

PCR Washing machine

Most of the Product Category Rules (PCR) available in the PCR library of the International EPD System consists of up-to-date and valid PCRs. These are documents that can be used by any company to develop, verify and register EPDs for their products.

There are, however, a few expired PCRs that have not been updated such as:

Stakeholders interested in using these PCRs are very welcome to apply to become the new PCR moderator, and to lead the work in the update phase. The update should use these existing documents as starting points for some methodological aspects, but the new PCRs shall be made compliant with the latest General Programme Instructions and the latest PCR template.

Any company, industry association or other stakeholder who is willing to take on the role of PCR Moderator any for these documents is kindly requested to contact the Secretariat (pcr@environdec.com).


10, 2016

Looking for tenders for independent verification of an EPD? (reminder)

EPD verification in the International EPD® System is be done by an accredited certification body or by an approved individual verifier that is listed on this page. The verifiers work independently from the programme operator to seek verification tasks, and are free to work in the geographical areas and product groups where they have sufficient knowledge to carry out the task in a correct way.

As it is not always easy for a company to find a verifier, the Secretariat will launch a trial new service on www.enviondec.com: an EPD Verification marketplace, where companies can post information and let verifiers contact them (instead of the company contacting multiple potential verifiers).

If your company has started developing an EPD in the International EPD® System and would like to receive tenders from relevant, approved verifiers, please contact the Secretariat with the following information:

  • Product category or PCR
  • Geographical scope of EPD
  • Estimated dates for start and end of verification
  • Contact person e-mail address
  • Other relevant information for potential verifiers
  • Date after which the information shall be removed for the marketplace

This information will then be published on a dedicated page at www.environdec.com, which will be accessible only to the approved individual verifiers and accredited certification bodies.

This marketplace is a trial service, and the administration is offered without charge by the Secretariat. Participation is voluntary.